250g EEG Conductive Paste Reduce The Interface Impedance Between Electrode And Target
|
Conductive EEG Paste Reduce The Interface Impedance Between
Electrode And Target
Contains: Carboxymethyl cellulose, Polyoxyethylene (20) stearylether,
Water,Glycerin,Lanolin alcohol,Coconut fatty acid diethanolamide,1.2 Propanediol,Potassium
chloride,Sodium Chloride,Polyxoyethylene(20)sorbitol,Methylparaben,and Propylparaben. Usage: For use in neuromonitoring procedures in conjunction with electrodes.Use a bell shaped cup electrode with the hole in the center.Apply just enough paste inside of the EEG electrode to very slightly overfill the cup. Place the electrode onto the electrode site and press with medium pressure. A small amount of paste may come out the hole.Pressing too hard will cause all of the paste to come out and electrode will not adhere well. Clean with warm water.
Directions: Store the paste in a cool place away from direct sunlight. Tighten the cap to prevent paste from drying. Do not use dried paste because the EEG waveform cannot be recorded.
Feature: EEG Electrode paste with low impedance highly conductive gel, specially formulated to stick the electrodes on the skin without
additional adhesive disks. Used with all surface applied electrodes. Shelf life is 2 years unopened 6 months after opening Applicable Instruments: All EEG and EP/EMG Instruments.
|
||||||||||||||||||||||||
Product Tags: eeg conductive gel eeg conductive paste |
![]() |
Abrasive Conductive EEG Electrode Gel For Monitoring Brain Activity With Neuro Feedback |
![]() |
250g EEG Conductive Paste Reduce The Interface Impedance Between Electrode And Target |
![]() |
Skin Conductance EEG Electrode Paste , Electrode Conductive Gel For Brain Wave Monitor |
![]() |
High Conductive EEG Electrode Gel / Paste For Electrochemical Measurements |
![]() |
Easy Clean EEG Conductive Adhesive Gel , EEG Conductive Gel For Long Term EEG Monitoring |
![]() |
Fragrance Free EEG Electrode Gel For Electrode Pads Low Measurement Resistance |