China Rib Lath Mesh manufacturer
ANPING COUNTY JIAFU WIRE MESH MANUFACTURING CO.,LTD
ANPING COUNTY JIAFU WIRE MESH MANUFACTURING CO.,LTD
8
Home > Products >

5cm wing angle plaster bead

Browse Categories

ANPING COUNTY JIAFU WIRE MESH MANUFACTURING CO.,LTD

City: hengshui

Province/State:hebei

Country/Region:china

Tel:86-0318-7753558

View Contact Details
261 - 270 of 380

5cm wing angle plaster bead

Selling leads
...plaster dabs to the wall at both sides of the corner at approximately 600mm intervals. The bead is then placed against the corner and the mesh ... 2024-12-09 18:20:48
...plaster dabs to the wall at both sides of the corner at approximately 600mm intervals. The bead is then placed against the corner and the mesh ... 2024-12-09 18:31:40
...plaster dabs to the wall at both sides of the corner at approximately 600mm intervals. The bead is then placed against the corner and the mesh ... 2024-12-09 18:43:01
...plaster dabs to the wall at both sides of the corner at approximately 600mm intervals. The bead is then placed against the corner and the mesh ... 2024-12-09 18:43:01
...plaster dabs to the wall at both sides of the corner at approximately 600mm intervals. The bead is then placed against the corner and the mesh ... 2024-12-09 22:13:56
...plaster dabs to the wall at both sides of the corner at approximately 600mm intervals. The bead is then placed against the corner and the mesh ... 2024-12-09 22:13:56
...plaster dabs to the wall at both sides of the corner at approximately 600mm intervals. The bead is then placed against the corner and the mesh ... 2024-12-09 22:13:56
...plaster dabs to the wall at both sides of the corner at approximately 600mm intervals. The bead is then placed against the corner and the mesh ... 2024-12-09 22:13:56
3cm Wings Metal Angle Bead Hot Dip Galvanized 2.7m 50-80 Pcs / Box Angle bead have a smooth round nose bead with diamond mesh wings for the keying of ... 2024-12-09 17:40:41
...h diamond mesh wings for the keying of plaster right up to the nose of the bead. On the outside is the finished edge which is where one side of ... 2024-12-09 19:10:13
Page 27 of 38 :   |< << 23 24 25 26 27 28 29 30 31 >> >|