Laboratory Spark Plasma Sintering Furnace For Nanophase Materials

1. working temperature up to 2400°C

2. vacuum: 5×10-3mbar

3. furnace gas: Ar / N2 (and others, on request)

4. servo hydraulic force control

5. precise, rigid frame with low deformation, accurate guiding of the pressing dies

6. measuring of densificatio path

7. double-walled water-cooled stainless steel vacuum vessel with a leak rate of up to 1×10-3 mbar l/s

8. easy accessibility

9. temperature measurement and control can be chosen between axial/radial pyrometer or flexibl thermocouples

10. freely programmable sintering parameters for up to 50 segments per recipe

11. freely programmamable pulse on/off (1...255 ms) for each segment individually

12. heating rate up to 1000 K/min

13. extensive software for data recording and evaluation of all sintering parameters

14. user friendly online process management system

4. Applicable:

Metal:Fe, Cu, Al, Au, Ag, Ni, Cr, Mo, Sn, Ti, W, Be, etc.

Ceramics Oxyde: Al2O3, Mulite, ZrO2, MgO, SiO2, TiO2, HfO2
Carbide: SiC,B4C, TaC, WC, ZrC, VC
Nitride: Si3N4, TaN, TiN, AlN, ZrN, VN
Boride: TiB2, HfB2, LaB6, ZrB2, VB2
Fluoride: LiF, CaF2, MgF2
Cermet: Si3N4+Ni, Al2O3+Ni, ZrO2+Ni, Al2O3+Ti, SUS+WC/Co, BN+Fe, WC+Co+Fe
Intermetallic Compound: TiAl, MoSi2, Si3Zr5, NiAl, NbCo, NbAl, LaBaCuSO4, Sm2Co17
And other Organic Material, Composite Material.
 

5. Equipment Characteristics

• Fast sintering, good energy-saving, high efficiency

• Adopts DC pulse to realize the heating cycle.

• Through absorption and digestion of the Japanese technology, we create our own equipment with lateral door-opening framework. All the processing location are processed precisely by the machining center, to ensure no errors exist in every parts. Meanwhile, the pressure heads up and down keep concentric, same place and simultaneous

 
6. Supply Scope:

 
 
7. Customer Cases
 






 

FAQ

1. How can I know your factory can produce equipment I need?

Re: Contact us and let us know your requirements of equipment. Then we will send these requirements to our technical department. So we will know whether our factory can offer you equipment or not.

2. Does your company customize equipment for customer?

Re: Yes, we can customize equipment according to customers' requirements.

3. How can I believe your quality?

Our equipment are eqquiped with mechanical parts of world renowned brands like Schneider, Omron and so on, and also approved ISO9001 certification.

www.advancedatomizer.com

SEND US AN INQUIRY NOW !