Product description: Our pneumatic telescopic mast
mast lifter is also a rack height equipment carrier, suitable for
car, ship and land. It can elevate communications antenna,
illumination, lightning shielding, optical transmission and camera
equipment to a predetermined height quickly, reliably and securely.
After the work is completed, it is also able to reduce the
above-mentioned equipment to a predetermined height quickly,
reliably and safely. Our company's pneumatic telescopic mast lifter
is made of high-strength aluminum alloy, with the advantage of
corrosion-resistant, light weight, large load, low noise, fast
lift, small shock resistance, stable and so on. It could meet
different areas, different occasions on the height and load
requirements, in addition, it is also widely used in golf, large
football night lighting, etc.Working principle: The system uses pneumatic handspike
theory.it can use RS485 to control lifter .Its good self-locking
performance achieving reliable ,self-locking in any position
improves the safety of reliability.
Advantage of Okaf Pneumatic Telescopic Mast
1. Wide range application. Suitable for vehicle, vessel and ground
systems.
2. Fast lifting. Within 1 minute to raise the telecommunication
antennas, led lights,mobile surveillance PTZ Cameras and Lightning
protection rod.
3. Portable. The telescopic mast is lightweight, with the wheels,
you can take it easily.
4. Stable and safety. The mast is high strength, it can work during
the 8 degree wind. With the tripod, it can stand well on the
ground.
5. Long life span. The aluminum mast is anti corrosive which can
long last many years.
6. Customized available. The height, payload and function can be
customized according to your requirement.
7. Offer solutions. Our professional technician team help to
provide best solution according to the needs.
Environmental adaptability| Items | Test condition | Anti-wind capability | Level 8 wind: work normally; level 12 wind: can not be destroyed
(working condition, nailed into the ground, 3-4 guy wires, pull
angle: 30-40 degrees, the guy wire is tight).GJB74A-1998 3.13.13 | | Low tempertaure storage | -55° | | Low tempertaure working | -40° | | high temperature storage | 70° | | high-temperature working | 55° | | Humidity | less than 90%(temperature 25°) | | Exposed to the rain | Strength 6mm/min, the time of duration is 1 hour | | Antiseptic | Refer to GJB150.11A-2009 Standard test | | Dust-proof | Refer to GJB150.12.1986 Standard test | | Solar radiation | Refer to GJB150.7.1986 Standard test | | Mould | Refer to GJB150.2.1986 the second chapter standard inspection.
Mildew-growing level: level 1 | | | | Operating | Pneumatic Mast | | Level of rotation speed | 6r/min | | Vertical of rotation speed | 66Km/h | | Control way | RS485,Pelco-D/P agreement,remote control | | Material | aluminium alloy | | weight capacity | 10 KG | | Voltage | DC12V-15A | | Security | Self-locking at any height; would not fall at any time |
Options for telescopic Mast : | Model | Retracted height(mm) | Extended height(mm) | Maximum diameter(mm) | Number of section | Top payload (kg) | | OK-QD-23TX | 1300 | 2300 | 55 | 2 | 20 | | OK-QD-27TX | 1270 | 2700 | 69 | 3 | 20 | | OK-QD-35TX | 1528 | 3500 | 69 | 3 | 20 | | OK-QD-42TX | 1520 | 4200 | 87 | 4 | 20 | | OK-QD-57TX | 1880 | 5700 | 87 | 4 | 20 | | OK-QD-58E | 1760 | 5800 | 87 | 4 | 20 | | OK-QD-45G-01 | 1684 | 4500 | 133 | 4 | 100 | | OK-QD-55G-01 | 1799 | 5500 | 133 | 4 | 100 | | OK-QD-65G-01 | 1792 | 6500 | 133 | 5 | 80 | | OK-QD-75G-01 | 1811 | 7500 | 160 | 6 | 80 | | OK-QD-85G-01 | 2300 | 8500 | 140 | 5 | 40 | | OK-QD-90G-04 | 2200 | 9000 | 140 | 6 | 40 | | OK-QD-100G-04 | 2200 | 10000 | 160 | 6 | 40 | | OK-QD-110G-04 | 2400 | 11000 | 160 | 6 | 40 | | OK-QD-120G-01 | 2400 | 12000 | 180 | 7 | 70 | | OK-QD-150G-01 | 2900 | 15000 | 202 | 8 | 40 | | OK-QD-180G-01 | 3400 | 18000 | 202 | 7 | 70 | | OK-QD-200G-01 | 3300 | 20000 | 229 | 8 | 40 |
|
