MS3006 Multi-Angle Spectrophotometer MS3006 Multi-angle spectrophotometer adopts Industrial-grade MCU
with 6 measuring angles (6 illumination sources, 1 receiver), which can provide accurate and consistent color measurement for
metalllics, pearlescents and other complex special effect finished
products. The smooth operating system and superior performance of
the optical system allow the MS3006 multi-angle spectrometer to
provide repeatability and reproducibility of Sparkle
Grade(SG),Diffuse coarseness(DC) and Color Variation(CV)
measurement. The higher optical resolution ensures the measuring speed,
accuracy, stability and consistency of the instrument. The core
technology makes it as the same platform with international
standards and complete compatibility. The Full spectrum LED
light source with blue enhancement ensures sufficient spectral
distribution in the visible light range, avoids the spectral loss
of LED in a specific band, and ensures the accuracy of instrument
measurement results and low cost maintenance.The instrument
appearance design is easy to operate, and the hand holding position
and the measurement button are well-designed, which can meet
different holding habits, smooth and fine surface, from the
high-precision appearance treatment process. 3nh Multi-angle spectrophotometer MS3006 is used to measure the
color difference for the surface paint which is affected by
different viewing angles and viewing conditions. It can not only
measure multi-angle color difference, but also measure and
characterize special finishes through 6 measuring angles. Even in
the curved surface, it also has high measuring accuracy and
stability. It Offers CIE LAB,XYZ,Yxy,LCh,β XY,DIN Lab99 color space, And D65, A,
C, D50, D55, D75, F1, F2 (CWF), F3, F4 and F5, F6 and F7 (DLF), F8,
F9, F10 (TPL5), and F11 (TL84), F12 (TL83/U30) A variety of light
source, which can meet the special measurement demand under
different measurement conditions. Technical parameters | Model | MS3006 | | Measurement Geometry | 6 measurement angles (6 illumination sources, 1 receivers) | | Measure Angle | 45° Receiver:
45as-15°,45as15°,45as25°,45as45°,45as75°,45as110° Conform to the standards:ASTM D 2244,E 308,E 1164,E 2194, E2539,DIN
5033,5036,6174,6175-1,6175-2;ISO 7724, 11664-4
SAE J 1545 | | Application | Provide accurate and consistent color measurement for metallic,
pearlescent and other complex special effect color products | | Light Source | Full spectrum LED light source with blue enhancement | | Lamp Life | 5 years, 3 million times measurements | | Spectrophotometric Mode | Concave Grating | | Sensor | 256 Image Element Double Array CMOS Image Sensor | | Wavelength Range | 400nm-700nm | | Wavelength Interval | 10nm | | Measurement Range | 0~600% | | Semiband Width | 10nm | | Measuring Aperture | Φ12mm | | Color Space | CIE LAB,XYZ,Yxy,LCh,βxy,DIN Lab99 | | Color Difference Formula | ΔE*ab,ΔE*94,ΔE*cmc(2:1),ΔE*cmc(1:1),ΔE*00, DINΔE99,ΔE DIN6175 | | Other Colorimetric Index | Flop Index, Int-Em | | Observer Angle | 2°/10° | | Illuminant | D65,A,C,D50,D55,D75,F1,F2(CWF),F3,F4,F5,F6,F7(DLF),F8,F9,F10(TPL5),F11(TL84),F12(TL83/U30) | | Display | Spectrogram/Values, Samples Chromaticity Values, Color Difference
Values/Graph, PASS/FAIL Result, Color Offset, Color simulation,
Sample effect value, Effect difference value | | Measuring Time | Approx. 1 second for one angle Approx. 6 seconds for all angles | | Repeatability | Spectral reflectance: Standard deviation within 0.08% Chromaticity value: ΔE*ab 0.03 ( When a white calibration plate is
measured 30 times at 5 second intervals after white calibration) | | Reproducibility | △E*<0.10,avg on the gray tile of BCRA tile set
△E*<0.25,avg on the color BCRA tile set | | Inter-instrument Error | 0.2ΔE*00(avg on reference Series II BCRA tile set) | | Effect Parameters | Sparkle Grade(SG),Diffuse coarseness(DC) and Color Variation(CV) | | Effect Measurement | 6 angles Sparkle Grade(SG),Color
Variation(CV):15as-45°,15as-30°,15as-15°,15as15°,15as45°,15as80°
15d Diffuse coarseness(DC) | | | | | | | Effect Repeatability | Sparkle Grade(SG) Short-term repeatability: 0.12% (10 times
standard deviations) (When a color plate is measured 10 times at 10
second intervals after white calibration)
Diffuse coarseness(DC) Short-term repeatability:e0.09% (10 times
standard deviations) (When a color plate is measured 10 times at 10
second intervals after white calibration) | | Effect Reproducibility | Sparkle Grade(SG) Reproducibility: 1.9% (10 times standard
deviations) (avg on reference Series II BCRA tile set) Diffuse coarseness(DC) Reproducibility: 1.4% (10 times standard
deviations)(avg on reference Series II BCRA tile set) | | Trigger mode | Pressure sensing trigger, button trigger, software trigger | | Measuring Mode | Single measurement, average measurement (1-99), continuous
measurement (1-99) | | Locating Mode | Color camera preview | | Dimension | L*W*H=195X83X128mm | | Weight | About 1Kg | | Power | lithium-ion battery, 3.7V,3200mAh, Continuous test 6000 times
within 8 hours of full charge | | Display | 3.5-inch TFT color LCD, Capacitive Touch Screen | | Interface | USB, Bluetooth 5.0 | | Data Storage | 1000 pcs Standards,4000 pcs Samples. | | Language | Simplified Chinese, Traditional Chinese, English | | Operating Environment | 10℃ to 50℃, humidity does not exceed 85%, no condensation | | Storage Environment | -20℃ to 50℃, humidity does not exceed 85%, no condensation | | Calibration | Built-in white board parameters, external white board, black light
trap, color board | | Calibration Interval | 4 hours,8 hours,24 hours,Startup calibration | | Standard accessories | Power Adapter, USB Cable, User Guide,PC Software(download from the
official website), Calibration Board, black light trap,Protective
cap, wristband | | Optional Accessory | Micro-printer | | Notes | Technical parameters are for reference only, subject to actual
sales products. |
|
