411 - 420 of 1136
disposable cap making machine
Selling leads
|
1. Cleaning and assembling of moulds should not be hammered by steel, but by copper rods; polishing mirrors for moulding should not be scraped by hard ...
2026-07-07 00:11:28
|
|
Methods of elimination: 1, concentricity should be adjusted to less than 0.1MM. 2, modify the coupling. 3, repair or replace the oil pump. 4. Increase ...
2026-07-07 00:11:28
|
|
Hydraulic closed loop and motor speed closed loop is realized by control system with the features of high repetition, high linearity, high linearity, ...
2026-07-07 00:11:28
|
|
High Energy saving Under the ideal working state, Power consumption is 40% less than that of variable displacement pump and 70% less than that of ...
2026-07-07 00:11:28
|
|
Short and forceful double-cylinder injection system is used to ensure the steady injection motion.The strain free fixed mold plate and screw assembly ...
2026-07-07 00:11:28
|
|
1. Powerful, friendly control system Adopts professional controller and friendly interface, easy and fast operation, with good reliability. 2. New ...
2026-07-07 00:11:28
|
|
Hydraulic closed loop and motor speed closed loop is realized by control system with the features of high repetition, high linearity, high linearity, ...
2026-07-07 00:11:28
|
|
1.The rigid one-piece injection base supports the common slide rail for injection and screw movements. 2.Highly optimized servo-hydraulic technology, ...
2026-07-07 00:11:28
|
|
Some specific ways to avoid costly mistakes during the product design process are to plan for uniform wall thickness whenever possible, and to ...
2026-07-07 00:11:28
|
|
Adjustment Unit Automatic Mold Height Adjustment Saves the time and cost during the mold changing. Clamping Unit The plates were designed using FEM ...
2026-07-07 00:11:28
|