221 - 230 of 3115
9kw plastic injection molding machine
Selling leads
|
1. Powerful, friendly control system Adopts professional controller and friendly interface, easy and fast operation, with good reliability. 2. New ...
2026-07-02 00:09:59
|
|
1.Optimized clamping unit provides lower energy consumption and faster movements for reduced cycle times. 2.The redesigned toggle kinematics for ...
2026-07-02 00:09:59
|
|
13.The Machine Introduction The machine use the high-performance servo dynamic control system,the oil pump as the power source,having the characterist...
2026-07-02 00:09:59
|
|
Hydraulic closed loop and motor speed closed loop is realized by control system with the features of high repetition, high linearity, high linearity, ...
2026-07-02 00:09:59
|
|
1. Cleaning and assembling of moulds should not be hammered by steel, but by copper rods; polishing mirrors for moulding should not be scraped by hard ...
2026-07-02 00:09:59
|
|
Adjustment Unit Automatic Mold Height Adjustment Saves the time and cost during the mold changing. Clamping Unit The plates were designed using FEM ...
2026-07-02 00:09:59
|
|
Adjustment Unit Automatic Mold Height Adjustment Saves the time and cost during the mold changing. Clamping Unit The plates were designed using FEM ...
2026-07-02 00:09:59
|
|
Adjustment Unit Automatic Mold Height Adjustment Saves the time and cost during the mold changing. Clamping Unit The plates were designed using FEM ...
2026-07-02 00:09:59
|
|
Adjustment Unit Automatic Mold Height Adjustment Saves the time and cost during the mold changing. Clamping Unit The plates were designed using FEM ...
2026-07-02 00:09:59
|
|
Not designing the proper draft: This refers to the angle at which the finished product is ejected from the mold. An insufficient draft can lead to ...
2026-07-02 00:09:59
|