191 - 200 of 442
energy saving injection molding machine
Selling leads
|
To solve the shrinkage problem, the first thing to think about is to increase the injection pressure and prolong the injection time. But if the ...
2026-06-22 00:08:29
|
|
It is also known to most people that the shrinkage of injection parts is easy to occur when the melt temperature is too high. If the temperature is ...
2026-06-22 00:08:29
|
|
The shrinkage problem of hard rubber parts (surface concave shrinkage and internal shrinkage) is caused by the defect that the space left by the ...
2026-06-22 00:08:29
|
|
Double-loop control system is used in the case of different temperature needed for the dynamic and fixed template of the die. According to the ...
2026-06-22 00:08:29
|
|
Die positioning hole diameter 80~100 125~250 315 or more Coaxiality of nozzle and positioning hole of die is less than 0.25 less than 0.30 less than 0...
2026-06-22 00:08:29
|
|
When installing the machine, it is necessary to confirm the various environmental conditions. If the conditions are not met, erroneous actions may ...
2026-06-22 00:08:29
|
|
The small machine is integral and does not need to be disassembled and assembled. When lifting, the adjusting mode should be adjusted to the minimum ...
2026-06-22 00:08:29
|
|
Screw is the key component in plasticized parts, which is in direct contact with plastics. Plastics through the effective length of the screw groove ...
2026-06-22 00:08:29
|
|
Electricity is one of the biggest cost expenditures for injection moulding products besides raw materials. For most injection moulding machines, ...
2026-06-22 00:08:29
|
|
Different plastics have different requirements for the shape of plastic screw in injection moulding machine because of their different melting speed, ...
2026-06-22 00:08:29
|