101 - 110 of 301
surface burning characteristics testing equipment
Selling leads
|
...used with the pull and push dynamometer for the tension test of the fabric or plush material of the toys surface. There are two kinds of the ...
2024-12-09 12:05:47
|
|
... Standards: ISO 8124-1 ASTM F963 EN-71 Within 30 s of removing the toy from conditioning, apply a force of (5+0.50)N to the external surface of the ...
2024-12-09 12:05:47
|
|
IEC 60332-3 Vertical Flammability Tester For Burning Behaviour Of Bunched Cables Introduction: Bunched Cable Vertical Flame Spread Tester is a series ...
2024-12-09 13:35:58
|
|
...Testing Equipment, Low Voltage Tracking Tester Description: ASTM D3638-92 low voltage tracking tester simulates wet/moisture condition, test ...
2024-12-09 12:04:01
|
|
...imposed by force. Pull the toy at a constant speed of 2 m/s ± 0.2 m/s on a surface covered with aluminum oxide sand paper P60 and determine the ...
2024-12-09 12:09:24
|
|
... heating regulation material (Ni80 / Cr20) of resistance wire (Φ 4 mm Ni-Cr alloy wire) to 0°C~ 1000°C in 1 min, then with 1.0 N vertically burn it ...
2024-12-09 12:16:31
|
|
... elements on one face The furnace linings consist of refractory materials with densities of less than 1000 kg/m3and these constitute more than 70% ...
2024-12-09 12:04:10
|
|
... the biting ability of the toys accessories’ surface. Parameters: The size: L*W*H=90*43*46mm Weight:750g Material: stainless steel Package: wood ...
2024-12-09 12:05:47
|
|
... openings with a lower edge of 600 mm or more above the ground or any other surface which is of such a size that it will support a child, shall be ...
2024-12-09 12:05:47
|
|
...Testing Equipment ASTM Impact Flooring Medium Description: A standardized surface onto which a toy can be dropped from a certain height to simulate ...
2024-12-09 12:05:47
|