651 - 660 of 1665
electronic flammability test equipment
Selling leads
|
...exposed surfaces such as walls and ceilings (including solid plastics), at the same time measure smoke density. This test method applies to the ...
2025-09-17 00:19:17
|
|
...: This equipment is suitable for water hoses, nozzles, pipes, angle valves, etc. Flow rate not exceeding 30 liters/minute, dynamic pressure less ...
2026-06-22 00:18:37
|
|
...Flammability Tester Color Standard With Mass Flow Control Set Descriptions: Wire and Cable Fire-resistance Impact Tester is used to detect the fire ...
2024-12-09 13:47:17
|
|
...the most widely used and lower cost of cable fire performance test equipment; TESTECH single cable combustion tester meet the standards IEC 60332-1...
2024-12-09 13:47:17
|
|
... and flame propagation rate of exposed surfaces such as walls and ceilings (including solid plastics), at the same time measure smoke density. This ...
2025-08-17 00:13:17
|
|
...rigid and elastic material performance evaluation, and it is developed according to flame test standard NF P92-501. Standard: NF P92-505 Dripping ...
2024-12-09 12:57:32
|
|
... flame retardant coatings applied to the surface of flammable substrates. Techinical parameters: Temperature alarm: 180℃-220℃±2℃ Pressure measuring ...
2024-12-09 12:31:54
|
|
...er a condition in the absence of external radiation to direct impact of vertically placed samples with a small flame to determine the flammability ...
2025-12-25 00:49:25
|
|
... alloy wire) to 0°C~ 1000°C in 1 min, then with 1.0 N vertically burn it 30s,measure the fire risk by product light-off or hold burning time, also ...
2025-07-28 00:13:28
|
|
... Flammability Tester For Burning Behaviour Of Bunched Cables Introduction Bunched Cable Vertical Flame Spread Tester is a series conforming to IEC ...
2024-12-09 12:18:37
|