81 - 90 of 114
45 degree vertical flammability tester
Selling leads
|
...Flammability Testing Equipment Description: Blanket Flammability Tester to test blanket fabric flame retardant performance and fabric surface flame ...
2024-12-09 12:04:10
|
|
.... The needle flame test is to use a needle burner of the specified size (Φ0.9mm), with a specific gas (butane or propane), and the sample is fired ...
2024-12-09 12:32:15
|
|
... IEC60695-11-3. The fire hazard is evaluated by burning rate, after glow time, after flame time and damage length of the specimen. The horizontal ...
2024-12-09 12:04:01
|
|
... electricity heating regulation material (Ni80 / Cr20) of resistance wire (Φ 4 mm Ni-Cr alloy wire) to 0°C~ 1000°C in 1 min, then with 1.0 N ...
2024-12-09 13:35:58
|
|
...Flammability Testing Equipment with 0°/22.5°/90° Burner Angle Description: This textile flammability tester machine is used to test the flame ...
2024-12-09 12:04:01
|
|
... tester machine is used to test the flame spread performance of single-or multi-component (coating, quilted, multi-layered, laminated products and ...
2024-12-09 13:48:10
|
|
Single-Chip Control Horizontal Flammability Test Equipment Corrosion Resistant Application: The tests are to comply with UL1581-2001 section 1060) ...
2024-12-09 12:04:01
|
|
..., mainly by testing the after-burning time after ignition of the material, the smoldering time and the length of damage after burning (carbon ...
2024-12-09 13:47:17
|
|
...Flammability Testing Equipment Tester Machine This texitle flammability tester machine is used to test the flame spread performance of single-or ...
2024-12-21 10:30:41
|
|
...Flammability Testing Equipment Vertical ISO 6940 Description: This textile flammability tester machine is used to test the flame spread performance ...
2024-12-09 13:47:17
|