131 - 140 of 224
tungsten carbide reverse circulation drilling bit
Selling leads
...drill bit immediately as the cutting orsample is formed.The drilled sampledoes not have to travel the length of the hammer where contamination and ...
2024-12-09 12:11:48
|
...cutting orsample is formed.The drilled sampledoes not have to travel the length of the hammer where contamination and loss of sample takes place. ...
2024-12-09 12:11:48
|
...l, geothermal air conditioning well, geologic exploration, gravel stratum, etc. Especial suitable for complicated formation (Formation loose, ...
2025-07-13 00:06:31
|
...Reverse circulation (RC) drilling uses a bit attached to a down-hole hammer to produce a hole. Unlike diamond drilling, RC drilling produces ...
2025-07-13 00:06:31
|
... rods that consist of an outer drill rod with an inner tube. These hollow inner tubes allow the drill cuttings to be transported back to the ...
2025-07-13 00:06:31
|
Concave Face Quality Carbide DTH Bit 115mm DHD340A Use For Medium Hard Rock Formation Product description Down The Hole Bit, usually called DTH bit, ...
2024-12-09 13:11:32
|
...prevent getting clogged with material as they cut through the surface material. Tungsten carbide insert (TCI) tricone bits are used for medium and ...
2024-12-09 12:46:45
|
...Tungsten Carbide Chevron Bit with API 3 1/2" REG Thread Product Introduce Chevron-Type drag bits are recommended for drilling in slightly harder ...
2024-12-09 13:15:04
|
SRC542 SRC543 SRC545 Reverse Circulation RC Drill Bits For Hard Formation RC bits Model SRC542 for shank RE542 Diameter No x Button diameter mm Button ...
2024-12-09 12:18:50
|
...Carbide Tricone Rock Roller Bits for Exploration The TCI Tricone bits drilling for medium to hard rock formation.The medium formation TCI tricone ...
2024-12-09 12:54:22
|