671 - 680 of 782
src547 rock drill bits
Selling leads
|
... pin Weight (less bit) 100kg Hole range 155mm-203mm Working pressure 10-35bar Impact rate at 1.7 Mpa 23Hz Recommended rotation speed 20-30 r/min ...
2024-12-09 12:11:40
|
|
... hammer can easily be modified to accept bits with Numa 180 and QL200 shank design by simply replacing the Chuck, Piston, Bit retainer and Bearing ...
2024-12-09 12:18:50
|
|
...Drilling Hammers (DHD, SD, QL, Mission, Numa, Cop) Product description DTH bit is our main product. We have rich experience in development and ...
2024-12-09 13:23:02
|
|
...drill rods that consist of an outer drill rod with an inner tube. These hollow inner tubes allow the drill cuttings to be transported back to the ...
2025-07-14 00:07:31
|
|
... field. Product introduction: Sollroc's DTH hammer consist of only two moving parts: the piston and the valve. With so few moving parts, the smart ...
2024-12-09 12:54:22
|
|
...Drill Hammer with Rentention for Mine Exploration Product Introduce: RC drilling is commonly employed in open-cut mines and used for pit grade ...
2025-07-14 00:07:31
|
|
...Drill Hammer for Mining Compatible with Size from 4''-12'' Product description: The DTH system is the most adaptable and may be utilized successful...
2024-12-09 17:30:39
|
|
... into a bore. It's a small jack hammer used to break hard rock into small particles that can be flushed away by the DTH hammer's air exhaust. The ...
2024-12-09 17:30:39
|
|
...Drilling Product description: A down-the-hole hammer (DTH hammer) is a tool that can be attached to the end of a drill string and inserted into a ...
2024-12-09 17:41:02
|
|
...drilling is one of the three main types of mineral exploration techniques offered. Used to compile sample rock cuttings, the drilling process ...
2025-07-14 00:07:31
|