441 - 450 of 451
shank src542 rc bits
Selling leads
|
...REG Weight(less bit) 40.7kg Hole range 110mm-130mm Working pressure 10-25bar Impact rate at 17bar 28Hz Recommended ...
2024-12-09 13:09:35
|
|
...REG 4'' QL40 DTH Hammer For Water Well drilling Technical parameter QL40 DTH hammer: shank QL40 Length(less bit) 1103mm External diameter 99mm Top ...
2024-12-09 13:09:44
|
|
...SD4 Hammer Down the Hole Drill Hammer For Blasting Technical parameter SD4 DTH hammer: shank SD4 Length(less bit) 1083mm External diameter 99mm Top ...
2024-12-09 13:09:44
|
|
...medium and supply continuous impact for bottom rocks with down-the-hole bit. They are widely used in ore drilling, water well drilling, Geothermal ...
2024-12-09 13:10:19
|
|
... medium and supply continuous impact for bottom rocks with down-the-hole bit. They are widely used in ore drilling, water well drilling, Geothermal ...
2024-12-09 13:10:19
|
|
...RC Drill Bit, known for its efficiency and durability in drilling holes with a diameter ranging from 85mm to 305mm. The use of forging in the ...
2026-04-08 18:54:29
|
|
Product Description Reverse circulation drilling (RC) is a drilling technique that allows samples to be retrieved with minimal contamination. Drilling ...
2025-12-29 17:13:51
|
|
Tubeless Down The Hole Hammer 3 Inch Hammer Without Footvalve For Shank QL30 Future: 1. Deliver maximum energy to drilling bit, fast drilling speed ...
2024-12-09 12:11:40
|
|
... a Dual Wall Pipe where the drilling medium, normally high pressure air, is passed between the outer and inner tubes down to the face of the ...
2024-12-09 12:11:48
|
|
Tubeless Down The Hole Hammer 10 Inch Hammer Without Footvalve For Shank SD10 Future: 1. Deliver maximum energy to drilling bit, fast drilling speed ...
2024-12-09 12:11:48
|