China DTH Drilling Tools manufacturer
Changsha Sollroc Engineering Equipments Co., Ltd
FOCUS IN MANUFACTURING OF HIGH QUALITY DTH AND RC DRILLING TOOLS.
8
Home > Products >

shank sd4 dth rock drill bit

Browse Categories

Changsha Sollroc Engineering Equipments Co., Ltd

City: changsha

Province/State:hunan

Country/Region:china

Tel:86-731-85551632

Contact Person:
Ms.Ling Bo
View Contact Details
321 - 330 of 332

shank sd4 dth rock drill bit

Selling leads
...-pressure air. An RC hammer exhausts the air down the outside splines of the percussion bit and then up its holes through the internal diameter of ... 2025-07-17 00:08:06
...good drilling performance and long service life. They are with high efficiency, low failure rate and long service life. Even for all kinds of high ... 2024-12-09 12:40:32
...rock formation. Different types of hammers are available, such as without valves, with valves and multi-speed hammers, all of which meet different ... 2025-07-17 00:08:06
...SD4 Hammer Down the Hole Drill Hammer For Blasting Technical parameter SD4 DTH hammer: shank SD4 Length(less bit) 1083mm External diameter 99mm Top ... 2024-12-09 13:09:44
...m the bore hole by the air exhausted from the DTH Hammer. The technique provides fast drilling of accurately aligned, straight and clean holes in ... 2024-12-09 12:57:59
...DTH Hammer Product description We are a leading manufacturer of rock drilling tools, like DTH hammers and bits, DTH drill pipes, RC hammers and ... 2024-12-09 13:23:02
...DTH Hammer For Efficient Drilling Technical parameter M30 DTH hammer: shank M30 Length(less bit) 955mm External diameter 82mm Top sub thread API 2 ... 2024-12-09 13:09:05
...DTH Hammer For Mining Technical parameter Cop44 DTH hammer: shank Cop44 Length(less bit) 1032mm External diameter 99mm Top sub thread API 2 3/8”REG ... 2024-12-09 13:09:35
... Recovery" or "Dual Wall Drilling", employs a Dual Wall Pipe where the drilling medium, normally high pressure air, is passed between the outer and ... 2024-12-09 12:11:48
...(less bit) 22.4kg Hole range 90mm-110mm Working pressure 7-25bar Impact rate at 17bar 32Hz Recommended rotation speed 30-70rpm Product introduction... 2024-12-09 13:09:05
Page 33 of 34 :   |< << 24 25 26 27 28 29 30 31 32 33 34 >> >|