551 - 560 of 837
rc dth hammer bits
Selling leads
|
... Down The Hole Hammer 12 Inch Hammer Without Footvalve For Shank SD12 Feature: 1. Deliver maximum energy to drilling bit, fast drilling speed and ...
2024-12-09 12:11:40
|
|
... and long service life of SOLLROC DTH hammer due to high quality alloy steel materials and advanced producing technology. 3. Low problem rate and ...
2024-12-09 12:11:40
|
|
... performance and long service life of SOLLROC DTH hammer due to high quality alloy steel materials and advanced producing technology. 3. Low ...
2024-12-09 12:11:40
|
|
... and long service life of SOLLROC DTH hammer due to high quality alloy steel materials and advanced producing technology. 3. Low problem rate and ...
2024-12-09 12:11:40
|
|
... pin Weight (less bit) 487kg (1071lbs) Hole range 305mm-445mm Working pressure 10-25bar Impact rate at 1.7 Mpa 16Hz Recommended rotation speed 15...
2024-12-09 12:11:40
|
|
... 3 1/2" REG pin Weight (less bit) 100kg Hole range 155mm-203mm Working pressure 10-35bar Impact rate at 1.7 Mpa 23Hz Recommended rotation speed 20...
2024-12-09 12:11:40
|
|
...cutting orsample is formed.The drilled sampledoes not have to travel the length of the hammer where contamination and loss of sample takes place. ...
2024-12-09 12:11:48
|
|
...DTH drill pipes are made of superior alloy and the both thread ends are friction welded to the seamless steel pipe.The high pressure air is ...
2024-12-09 12:46:19
|
|
...DTH drill pipes are made of superior alloy and the both thread ends are friction welded to the seamless steel pipe.The high pressure air is ...
2024-12-09 12:46:19
|
|
... welded to the seamless steel pipe.The high pressure air is delivered to DTH hammer by DTH drill pipe, simultaneously it transfers the rotation and ...
2024-12-09 13:27:40
|