471 - 480 of 703
mining dth drilling hammer
Selling leads
|
...Hammer For Surface Mining And Well Drilling Technical parameter MP35 DTH hammer: shank MP35 Length(less bit) 881mm External diameter 85mm Top sub ...
2024-12-09 13:08:32
|
|
... Hole Hammer For 8 Bar compressor CIR Series Hammer Hole Diameter 70mm to 165mm Feature: 1. Deliver maximum energy to drilling bit, fast drilling ...
2024-12-09 12:11:40
|
|
... Down The Hole Hammer 12 Inch Hammer Without Footvalve For Shank SD12 Feature: 1. Deliver maximum energy to drilling bit, fast drilling speed and ...
2024-12-09 12:11:40
|
|
... and long service life of SOLLROC DTH hammer due to high quality alloy steel materials and advanced producing technology. 3. Low problem rate and ...
2024-12-09 12:11:40
|
|
... ore grade control. Reference the design and production experience of convientional DTH hammer and combine the oprating characteristics of RC ...
2024-12-09 12:33:51
|
|
... materials.It is composed of a hammer bit,a piston and an air chamber. The piston moves back and forth within the chamber,causing the bit to strike ...
2024-12-09 18:14:14
|
|
... at 1.7 Mpa 16Hz Recommended rotation speed 15-25 r/min Air consumption at 10-24 bar 1059-2754CFM DTH bits 305-445mm for above hammers can be
2024-12-09 12:11:40
|
|
... at 1.7 Mpa 23Hz Recommended rotation speed 20-30 r/min Air consumption at 7-14 bar 350-1006 CFM DTH bits 155-203mm for
2024-12-09 12:11:40
|
|
...wear characteristics. Specific heat treatment standards and special "stress relief" processes ensure consistent performance. DTH hammer are ...
2025-07-29 00:06:18
|
|
...drilling speed, lower air consumption and lower oil consumption. Fewer internal parts, simple structure, long life, less failure and easier to ...
2024-12-09 12:11:40
|