241 - 250 of 479
m40 dth hammer
Selling leads
|
... 7-25bar Impact rate at 17bar 32Hz Recommended rotation speed 30-70rpm Product introduction: A down-the-hole drill, usually called DTH by most ...
2024-12-09 13:09:05
|
|
Black 6'' DHD360 DTH Drilling Hammer For Surface Mining and Well Drilling Product introduction: DTH Hammer is one of key components for drilling ...
2024-12-09 13:16:18
|
|
8'' DTH Drill Hammer with Thread 4 1/2'' API REG for Comstruction Drilling Product description SOLLROC DTH hammers is designed around proven ...
2026-04-29 00:08:31
|
|
DTH Drilling Hammer 4'' Shank HD45 for Mining, Quarry and Rock Drilling Product Advantages: 1. The check valve can be replaced to the one with bigger ...
2024-12-09 17:20:08
|
|
...n The Hole Hammer 6 Inch Hammer Without Footvalve For Shank SD6 Product Description DTH hammers without footvalve can be available. Different out ...
2024-12-09 12:11:40
|
|
... performance and long service life of SOLLROC DTH hammer due to high quality alloy steel materials and advanced producing technology. 3. Low ...
2024-12-09 12:11:48
|
|
... impact motivation parts down the hole, to control the piston reciprocating motion by the distribution device in the hammer, and then impacts the ...
2024-12-09 12:31:00
|
|
... motion by the distribution device in the hammer, and then impacts the DTH bit in the front of the hammer to transit the impacting power to the bit...
2024-12-09 12:35:25
|
|
Product description Sollroc supplys DTH hammers and bits from 2”-18” with DHD, SD, QL, Mission, Numa which has the features as follows: 1. DTH hammers ...
2024-12-09 12:33:51
|
|
...DTH) hammers and bits for the mining, construction and water well industries. Drill and blast engineers and water well contractors trust Sollroc’s ...
2024-12-09 12:40:32
|