731 - 740 of 762
carbide rc drill bits
Selling leads
|
Boring Machine Parts Down The Hole Hammer 4 Inch Hammer Without Footvalve For Shank QL40 Future: 1. Deliver maximum energy to drilling bit, fast ...
2024-12-09 12:11:48
|
|
...y factors such as cost, time, environmental impact, depth of drilling and sample quality. Reverse Circulation drilling offers many advantages over ...
2025-07-29 00:06:18
|
|
... Recovery" or "Dual Wall Drilling", employs a Dual Wall Pipe where the drilling medium, normally high pressure air, is passed between the outer and ...
2024-12-09 12:11:48
|
|
...Drill Hammer With Hole Range 135mm-155mm For Blasting Drilling Product description Commonly known as DTH, the Down-the-Hole Hammer drill is a ...
2024-12-09 13:23:29
|
|
... are not simply placed onto the surface surrounding the machine but the samples are instead shot up into the hollow pipe of the machine. This is ...
2024-12-09 12:35:25
|
|
... is from 6mm-25mm. These model all can be used for grinding both the bit button and body steel in one operation. The combination grinding pin ...
2024-12-09 12:11:48
|
|
...bit, reamer and guide device When drilling begins, the ODEX reamer swings out and drills a hole wide enough for the casing tube to slide down ...
2024-12-09 12:46:28
|
|
...to reached the eccentric bit that can be retrieved leaving the casing in place for sampling or installations. the odex equipment enables you to ...
2024-12-09 12:37:45
|
|
...bit) 1030mm External diameter 98mm Top sub thread API 2 3/8”REG Weight(less bit) 42kg Hole range 110mm-130mm Working pressure 10-25bar Impact rate ...
2024-12-09 13:09:44
|
|
...Bit Shank Cop64/DHD360 Product description DTH hammer is a percussion system driving a piston inside hammer body with up and donw motion by ...
2024-12-09 13:25:29
|