521 - 530 of 571
24 dth button bits
Selling leads
|
...(less bit) 22.4kg Hole range 90mm-110mm Working pressure 7-25bar Impact rate at 17bar 32Hz Recommended rotation speed 30-70rpm Product introduction...
2024-12-09 13:09:05
|
|
...DTH Hammer For Mining Technical parameter Cop44 DTH hammer: shank Cop44 Length(less bit) 1032mm External diameter 99mm Top sub thread API 2 3/8”REG ...
2024-12-09 13:09:35
|
|
...REG Weight(less bit) 40.7kg Hole range 110mm-130mm Working pressure 10-25bar Impact rate at 17bar 28Hz Recommended rotation speed 30-70rpm Product ...
2024-12-09 13:09:35
|
|
...DTH Down The Hole Hammer For Quarry Drilling Product introduction: DTH Hammer is one of key components for drilling equipment. They are powered by ...
2024-12-09 13:10:19
|
|
...DTH hammers without footvalve can be available. Different out diameters of out cylinder can be available. DTH bits 60mm-381mm for above hammers can ...
2024-12-09 12:11:40
|
|
... pin Weight (less bit) 487kg (1071lbs) Hole range 305mm-445mm Working pressure 10-25bar Impact rate at 1.7 Mpa 16Hz Recommended rotation speed 15...
2024-12-09 12:11:40
|
|
... performance and long service life of SOLLROC DTH hammer due to high quality alloy steel materials and advanced producing technology. 3. Low ...
2024-12-09 12:11:48
|
|
... and long service life of SOLLROC DTH hammer due to high quality alloy steel materials and advanced producing technology. 3. Low problem rate and ...
2024-12-09 12:11:48
|
|
... performance and long service life of SOLLROC DTH hammer due to high quality alloy steel materials and advanced producing technology. 3. Low ...
2024-12-09 12:11:48
|
|
.... It is hollow to allow drilling fluid to be pumped down the hole through the bit and back up the annulus. Each drill pipe consists of three parts ...
2024-12-09 12:38:29
|