500Amp Lincoln China Made Mig Welding Machine full set on sale
CV500P
The digitally controlled Invertec ® CV/CC 500
provides constant voltage (CV) or constant current (CC) output for
heavy duty welding applications and delivers superior arc welding
performance and faster response to changes at the arc. It is
ideally suited for Mig and Flux Cored arc welding processes and for
fabricators mainly using 1.0mm to 1.6mm diameter solid and flux
core welding wires.
Take advantage of this inverter-based
power source to achieve high input power efficiency and power
factor ratings for real savings on your electric bills and decrease
your welding costs.
Heavy fabrication welding operations will appreciate the broad
multi-process performance of the CV/CC 500 featuring robust
stick, MIG and cored wire welding as well as precision Touch-Start
TIG performance.
Applications
GMAW, FCAW, GTAW (TIG), SMAW (STICK)
Features
- Lightweight and Portable - easy to move and suitable for stacking.
- A seven position welding process mode selection whichenables the
operator to select the right welding output for a specific welding
application.
- 87% efficiency with a high 0.95 power factor - unique design
provides dramatically lower power consumption.
- Touch-Start TIG makes it easy to achieve great arc start with
minimal or no tungsten contamination.
- Features full remote and multi-process capability - stick,
Touch-Start TIG, MIG, Flux-cored.
- Digital Meters - accurate weld parameter readings - weld parameter
readings retained after welding - auto fault diagnostic display.
- 5-500 Amp output range for all recommended processes is low
enough for TIG welding on thin sheet metal and robust enough for
stick welding with 6mm electrode.
- “Made To Last” PC Boards - “Trayed & Potted” PCB’s filled with
epoxy, double locked wiring harness connectors, and environmentally
protected connectors. Sensibly located to provide maximum
protection from the environment.
- Tested to Tough IP23 Classifications - designed for “Real”
industrial conditions.
- Easy Access Front Panel - multi-pin control socket and weld
terminals are protected by sturdy doors. Built tolast.
Required Options
Wire Feeder, Interconnection Cable Assembly (Includes Control
Cable, Welding Cable, Gas Hose), Work Cable with Clamp, Welding
Torch, Gas Regulator / Flowmeter, TIG Torch, Electrode Holder and
Cable, Remote Output Control
