45000CPH SMT Mounter 20 Heads Pick And Place Machine For Panel

SMT mounter for panel 45000CPH with 20 heads pick and place machine

Panel light classification

1. In terms of shape, general LED panel lights include round panel lights, square panel lights, rectangular panel lights, ring panel lights and special-shaped panel lights (such as leaves, diamonds...)

2. In terms of size, LED panel lights mainly include round 7 inches, 9 inches, and 12 inches.

The regular size of the square is 200*200CM, 300*300CM, 400*400CM, 500*500CM, 600*600CM.

The rectangle size is: 150*1200LM, 300*600CM, 300*1200CM, 600*1200CM.

3. From the power point of view, conventional LED panel lights are 9W, 10W, 12W, 18W, 24W, 36W, 42W, 50W, 72W, 80W

4. From the perspective of light entry, positive light-emitting panel lights and side-emitting panel lights

Product introduction

PCB length width: max 600*500mm min 100*100mm

2 sets of imported camera , with vision for the flight identification, Mark correction

XYZ Axis drive way:high-end magnetic linear motor and servo motor

High-speed pick and place machine

Software independent research and development by ETON

Product feature

Single module magnetic linear motor multifunctional pick and place machine

Mounting components: LED chip, capacitors, resistors, lens, IC, shaped components,etc

Component: Min.size 0402 Max.height 15mm

Machine parameter

Panel Light smt machine line

Fellow is ETON smt line solution for panel light, it is theoretical speed could be reach 45000 CPH(chip per hour)

This line function is placement led chip and other smd components on the pcb, it’s finished product is the pcba. The lighting board or the driver board for the led panel.

Machine operate

This is point is what buyer most worry about for machine, but don’t worry, our machine is very easy for operate, just like using the computer, intelligent and easy for learn. Usually several days for learning is enough. Besides, we also will sent engineer to your factory for machine install and training. So if you want to learn more about this machine, please contact us now.

Company Profile

Since its establishment in 2011, ETON has been committed to the development and production of SMT placement machines and peripheral equipment in 2007.
* Strong reach and develop technology team, support machine upgrade continuously, support client strong technical support
* Rich experience in SMT Industry Line. ETON set up more than 10 years, we are leading manufacturer of SMT machine in China
* Strong production capacity, ETON have more than 50000 square meter Industrial park in Jiangxi Province, machine capacity more
than 50 units/month
* Good and professional service. Provide engineer Door-to-door service, support video online training, video training share, free
replaced machine core part during warranty. And also we could provide professional SMT line solution.

FAQ

1. Do you have machine for led bulb?

A: Yes, we have many different module for produce led bulb, also above line is not only suitable for panel, it is also widely apply to many kind of led lighting and the electrical board, like the dob, display, downlight, street light, ceiling light, led tube, etc.

2.How to Contact

Contact David+ 86 13827425982