Servo Motor LED Assembly Machine 380V 50HZ For LED Light Mounting

Assembly making machine for led light mounting

Product Details

Model Number:YT101s

Dimension:2154*1376*1762mm

Component range:0201-40 *40mm package and IC etc.

PCB size:MAX:500*350mm/MIN:50*50mm

PCB thickness:0.5-4.5mm

No.of camera:2 sets

Repeat mounting Precision:±0.02mm (Repeat precision)

Mounting Height:≦20mm

Mounting speed:40000cph

Weight:1700kg

Speed:40000CPH

Power:380AC 50HZ

Feeder:16pcs

Heads:10pcs

PCB clamping:cylinder clamping,track width adjustable

Rail:rail 1 is fixed

X,Y,Z axis driver way:High-end magnetic linear motor+servo motor

Core Components:Motor

Brand:ETON

Introduction of 101

yt101s is roughly the same as yt101,the max PCB size 500*350mm, mini size 50*50mm.but it has higher precision.it apply to 0201-40*40mm tape reel package.components with size less than 40*40mm or height less than 20mm can be used to high-speed and high-precision identification,IC tray feeder support.in an optimal conditions,the speed can reach 4000CPH.In practical calculation of production capacity, many factors need to be considered, such as plate length, component size, component quantity, plate feeding time, plate number and so on. we have professional person can calculate this number for you.

The basic safety rules to operate the SMT machine:

1. Machine operators should be trained in proper methods.

2. Check the machine, replace parts or repair and internal adjustment should be turned off the power

3. Make sure to“Read the coordinates” and adjust the machine when the programming part is in your hand to stop the action at any time.

4. Ensure that the“Interlock” safety equipment remains in effect to stop the machine at any time and to check the machine on time

5. Only one operator is allowed to operate one machine during production.

6. During operation, make sure that all parts of the body, such as hands and head, are out of the range of movement of the machine.

7. The machine must be properly grounded and not ground to zero

8. Do not use the machine in a gas or dirty environment