Solder Paste Mixer Smt Assembly Equipment 1-99 Minute Digitally Adjustable Stiring Time

Solder paste mixer

Apply to:

Solder paste mixers are widely used in the smt field. The most important material for the printing press is the solder paste. The quality of the solder paste is not only related to the material of the solder paste itself, but also has a good relationship with the proper solder paste.

The advantages of a good mixer:

1. The stirring speed of the solder paste will affect the efficiency of production

2.Whether the solder paste is fully stirred will affect the quality of the product.

3.The material of the solder paste will have a certain impact on the function of the product.

The features of our solder paste mixer:

1. No gas problem

2. Maximum speed can reach 1000 rpm

3.Mixing time can be set arbitrarily

4. Has manual speed control function

5.Fixtures are suitable for all kinds of 500g packaging solder paste cans

Parameter:

Operation steps:

1.Open the top cover of the machine and check that there are no foreign objects inside the machine.

2. Turn the angle of the solder paste fixture of the machine and place the solder paste jar to be stirred into the machine. Inside the fixture.

3. Please turn the solder paste can by hand to confirm that there will be no collision, and the top cover of the machine Close and turn on the power switch.

4. Please turn the solder paste can by hand to confirm that there will be no collision, and the top cover of the machine Close and turn on the power switch.

5. The machine stops automatically until it is completed.

6. Determine the machine. After the operation stops, open the upper cover and remove the solder paste can on the clamp.

7. Open the top cover of the machine during operation, the machine will automatically stop running, and the upper cover will be covered. To continue the mixing operation, press the start switch again

8. Turn off the power switch

Attention:

1. When stirring, it is necessary to de-ice the solder paste beforehand

2. Does not destroy the shape of tin powder

3. Check that the screws are not loose

4. The bearing of this machine is fully enclosed and does not need to be lubricated.

5. Check the sensitivity of the machine switch and the upper cover before running.

Contact us:

We are the manufacture of smt machine, can provide a prodution line of smt machine. There are a lot of other related products, such as the pick and place machine, printer machine, reflown oven, loader, unloader, conveyor, and so on.

Add:44th.Building,5th.Cuigang Industrial Area, Fuyong, Baoan District, Shenzhen,China

Whatsup/wechat/phone:+86-13590151025

Fax:0755-29502066

Http:www.etonsmt.com