401 - 410 of 479
vertical impact test equipment
Selling leads
|
...Test Probe Wire Equipped with 42V Electrical Indicator IEC60529 1. Standard of IP40 Test Probe Wire IEC61032 and IEC60529 etc. 2. Test Sample of ...
2024-12-09 18:53:22
|
|
Test Probe 13 Conincal Pin Conforms to IEC61032 Accessability Test Finger Probe Introduction: It is designed according to IEC61032 figure 9. The pin ...
2024-12-09 18:22:24
|
|
... to check if the blades of hand-held blenders are completely screened from above and unable to touch a flat surface while rotating. The cylindrical ...
2024-12-09 22:53:48
|
|
... the electrical appliance in charged state, then to do the aging test and on-off ability test, the load current and surge current can be customized ...
2024-12-09 18:22:24
|
|
...Test Probe Kits (Wedge Probe, Jointed Test Finger, Rigid Test Finger and Test Pin) 1. Introduction The test probe kits are meet the requirement of ...
2024-12-09 19:02:04
|
|
...IEC61032 fig.1, and meet the requirements of IEC60529 regarding IP1X testing and IEC60065. This probe is intended to verify the protection of ...
2024-12-09 18:51:55
|
|
IEC61032 Test Probe 32 Test Rod with Third - Lab Calibration Certificate Introduction: It is designed according to IEC61032 figure 15. This rod is ...
2024-12-09 18:22:24
|
|
Portable Analog Force Gauge Pull - Push Gauge for Test Finger Probe 1.Feature ● High resolution: 1/200 scaleplate ● Hand-held equipment with small ...
2024-12-09 18:22:24
|
|
Plug Torque Test Device (plug-in Test Apparatus) 1. Introduction Plug torque test device is designed according to IEC60065 figure 11, it is applied to ...
2024-12-09 18:22:24
|
|
...Test Apparatus Equip with BS / UL / AS / NZS Plugs 1. Introduction The plug-in torque test apparatus is designed according to IEC60065 figure 11 ...
2024-12-09 18:48:07
|