11 - 20 of 187
ul746a impact test apparatus
Selling leads
|
...Hammer Mechanical Impact Test Apparatus IEC62262 1. Introduction The pendulum hammer mechanical impact test apparatus can meet the test requirement...
2025-07-26 00:07:09
|
|
...IEC60950-1 clause 4.2.5 and AS-NZS61439.4 clause 10.2.6.2. It is applied to do the drop impact test for external surface of enclosure. The device ...
2024-12-09 20:17:29
|
|
...Impact Test Apparatus 1. Introduction of Low Temperature Impact Test Apparatus: Low temperature impact test apparatus is designed according to ...
2024-12-09 19:02:52
|
|
...Impact Test Apparatus for Testing Pin-Insulating Seelves, Plug and Socket-Outlets 1. Introduction: Low temperature impact test apparatus is ...
2024-12-10 00:28:55
|
|
IEC60068-2-75 Spring Operated Hammer for IK01 to IK07 Made by Stainless Steel 1. Introduction IK07 spring hammer is designed according to IEC60068-2...
2025-07-26 00:07:09
|
|
...BS/EN60950-1:2001, BS7002:2001, GB4943-2001 and UL746A, IEC60947.1:1999, GB/T14048.1-2000, IEC730.1:1993, GB14536.1-1998 and etc.. It’s used to ...
2024-12-09 20:05:20
|
|
...UL746A Tracking Index Test Apparatus 220V/50Hz 1. Introduction The tracking index test apparatus is controlled by single chip and push buttons. The ...
2024-12-09 19:02:52
|
|
...Test Apparatus Fire Hazard Safety Testing Equipment 1. Introduction The glow wire tester is designed according to IEC60695-2-10 t0 IEC60695-2-13, ...
2024-12-09 19:02:52
|
|
... of IEC62262, IEC60598, EN50102, GB2423.55-2006, GB20138-2006 and etc. It is apply to sheet metal, household appliance, luminaire and etc. for ...
2024-12-09 18:54:37
|
|
.... IK ratings are defined as IKXX, XX is a number from 00 to 10 which indicates the degrees of protection provided by enclosures against external ...
2025-07-26 00:07:09
|