1 - 10 of 10
test probes for checking shutters
Selling leads
|
...Checking Shutters Test Probes 1. Introduction of Gauge A and B test probes: The gauge A and B test probes are strictly designed according to ...
2024-12-09 23:54:34
|
|
...Test Probes According to IEC60884-1 Figure 9 and Figure 10 for Socket - Outlet 1. Introduction of Socket-outlet test probes: The probes are ...
2024-12-09 18:22:24
|
|
... 20.102 and GB4706 clause 20.102, it is applied to check if the blades of hand-held blenders are completely screened from above and unable to touch ...
2024-12-09 22:53:48
|
|
... is for checking non-accessibility live part through shutters, 1N test probe is for checking non-accessibility live part through shutters and live ...
2024-12-09 19:45:42
|
|
Test Bar and Test Wire According to IEC61032 Test Probes 14 and 17 Made by Metal and Nylon 1. Test Probe 14 Introduction: Test probe 14 (Test bar : 3...
2024-12-09 18:35:34
|
|
...Test Finger Probe 14 Test Bar Conforms to IEC61032 with CNAS Certificate Introduction: It’s designed according to IEC61032 Figure 10. This bar is ...
2024-12-09 18:22:24
|
|
...Test Probe with CNAS Calibration Certificate Standards This telecom test probe is designed according to the standard of IEC60950, IEC60065, ...
2025-07-26 00:07:09
|
|
Accessability Test Finger Probe 17 Test Wire Conforms to IEC61032 for Electrical Toys Introduction: It’s designed according to IEC61032 Figure 11. ...
2024-12-09 18:22:24
|
|
...-2-100 figure 1 and IEC50636-2, it is simulate the young adult finger to check the protection against to hazardous moving parts of hand-held mains...
2025-07-26 00:07:09
|
|
...Probe as Per IEC60950, IEC60065 and IEC62368-1 for Testing TNT Circuit 1. Introduction The blunt probe is designed according to IEC60950 figure 2C, ...
2024-12-09 22:54:12
|