11 - 20 of 21
single phase contact gauge
Selling leads
... certification authorized by CNAS on request. ● 7006-24B-1: "Go" gauge for caps on finished lamps ● 7006-24C-1: "Not Go" gauge for caps on finished ...
2025-07-24 00:11:45
|
... caps on finished lamps 7006-27C-1 “Go” gauge for dimension “S1” of E27 caps on finished lamps 7006-28A-1 “Not Go” gauge for E27 caps on finished ...
2025-07-24 00:11:45
|
...dimension T1 minimum of caps on finished lamps shown on sheet 7004-21. Testing: When the cap on a finished lamp has been screwed into the gauge as ...
2025-07-24 00:11:45
|
...t for use on finished lamps) G5 7006-46-3 "Go" gauge for bi-pin cap on finished lamps G5 . 7006-46A-3 Plug gauge for lampholders for testing ...
2025-07-24 00:11:45
|
... and dimension T1 minimum of E40 caps on finished lamps. Testing: When the cap in a finished lamp has been screwed into the gauge as far as it will ...
2025-07-24 00:11:45
|
Three Phase Digital Power Meter with 600V Voltage and 40A current 1. Introduction of Three Phase Digital Power Meter The digital power meter is not ...
2024-12-09 21:19:05
|
...Contact and Non-Contact Test Gauges for Plug and Socket-Outlet Standard Number Description Figure number QTY BS1363-1 Test pin BS1363-1:1995 figure ...
2024-12-09 18:45:16
|
... three-pins maximum withdrawal Force Test Plug (10A/250V) to check the maximum force required when the plug is pulled out of the socket, and single...
2024-12-09 18:56:20
|
... in figure A.6 to A.7 are used to check pulling force, in case of socket-outlet the gauge in fig.8 to fig.10 are used additionally. No. Description ...
2024-12-09 18:22:24
|
..., UL1449 2. Introduction of Lighting Surge System: LSG-6K10 Lighting Surge System includes: 1.2/50ms Surge Generator, single phase CDN, Voltage ...
2024-12-09 18:56:04
|