11 - 20 of 48
minimum withdrawal force testing equipment
Selling leads
|
IEC60598-1 Clause 4.4.4 G5/G13 Lampholders Axial Force Test Device for Fluorescent Lamps 1. Introduction The axial force test device is designed to ...
2024-12-09 20:28:11
|
|
...Test Equipment for Medical Equipment 1. Introduction The handle strength test apparatus is designed to meet the test requirement of to IEC60236-1...
2024-12-09 20:33:12
|
|
...Test Equipment Dielectric Strengt Test Instrument 1. Application: The equipment is designed according to IEC60065 and UL1310, It’s mainly used for ...
2025-07-16 00:08:56
|
|
IEC61032 Test Probe C for IP3X / Test Rod with Handle 0~3N Force Applied 1. Introduction of Test Probe C: Test probe C (test rod) Designed according ...
2025-07-16 00:08:56
|
|
IEC61032 Test Probe D for IP4X / Test Wire with Nylon Handle 1N Force Applied 1. Introduction of Test Probe D: Test probe D (Test wire: Φ1.0 wire...
2025-07-16 00:08:56
|
|
...Testing Equipment Meet IEC60335-1 Figure 7 with 50N Force 1. Standard of Fingernail Probe: IEC60335-1, GB4706.1-2005, & UL etc. 2. Application of ...
2024-12-09 18:48:07
|
|
... to check the mechanical strength of non-solid pins of appliance inlet / plug connector. A force of 100N is exerted on the pin which is supported ...
2025-07-16 00:08:56
|
|
...IEC60236-1-2018 clause 8.8, GB9706.1-2007 clause 21. It’s applied to test the strength of handle for lifting or carrying the equipment, like of ...
2024-12-09 21:21:46
|
|
IEC60529 IEC61032 Test Probe A for IP1X / Accessiblity Test Probe 50mm Steel Sphere 1. Introduction: Test probe A ( Φ50 sphere with handle) is ...
2024-12-09 18:35:02
|
|
Portable Built-In Sensor Push-Pull Force Meter 50N/100N/200N/500N/1KN Range Optional 1. Features 1). High accuracy and resolution 2). Peak hold ...
2024-12-09 18:55:47
|