11 - 16 of 16
manual release vertical impact hammers
Selling leads
|
...Hammer with 500g Equivalent Mass for IK07 Impact Test 1. Introduction The spring hammer consists of three principal parts: the body, the striking ...
2025-07-14 00:08:55
|
|
... level is IK02. It is consists of three principal parts: the body, the striking element and the release system. The striking element comprises the ...
2025-07-14 00:08:55
|
|
...Hammer Impact Test Apparatus 1. Introduction This spring hammer can meet the requirement of IEC60068-2-75 and IEC62262, the impact energy is 0.14J ...
2025-07-14 00:08:55
|
|
...operator holds the striking element to release the hammer at the drop height specified in Table 2, the corresponding impact energy is generated. ...
2024-12-09 18:58:39
|
|
... of IEC62262, IEC60598, EN50102, GB2423.55-2006, GB20138-2006 and etc. It is apply to sheet metal, household appliance, luminaire and etc. for ...
2024-12-09 18:54:37
|
|
0.14J to 1J Universal Spring Hammer Test Apparatus 1. Introduction The universal spring hammer test apparatus is adjustable to peform IK01 (0.14J), ...
2025-07-14 00:08:55
|