101 - 110 of 552
mandrel electrical test equipment
Selling leads
|
...DC withstand voltage tester (hipot tester) is a equipment to test dielectric strength, can accurate and fast to test break down voltage, leakage ...
2024-12-09 18:47:35
|
|
...test the ground resistance between conductive parts and earth terminal. Ground resistance is one of important index of safety performance of ...
2024-12-09 18:47:52
|
|
... to the standards IEC60335-1 clause 20.1, IEC60065 clause 19.1, IEC60950 clause 4.1.1 and etc.. Inclined plane device is used to test the stablity ...
2026-07-31 00:40:10
|
|
..., which has no size and weight limit to the device under test. The equipment is consisted by control box, turntable, jet nozzles (diameter 6.3mm ...
2024-12-09 18:28:19
|
|
Cold Bend Test Apparatus IEC60811-1-4 for Cable Made by SUS304 Stainless Steel 1. Introduction The cold bend test apparatus is designed according to ...
2024-12-09 19:36:56
|
|
... interlock withstand the stresses. This equipment adopts PLC controller and 7 inch touch screen, built-in transformer to ensure rated voltage input...
2024-12-09 18:22:24
|
|
...Testing Equipment IEC60320-1 Pull Test Equipment for Connectors and Plug Connectors 1. Introduction The pull test apparatus designs to meet the ...
2026-07-31 00:40:10
|
|
... hazard is evaluated by burning rate, after glow time, after flame time and damage length of the specimen. HVR-4 horizontal and vertical flame test ...
2024-12-09 18:22:24
|
|
IEC60335-1 Clause 21.2 Scratch Test Pin Made of Hardened Steel 1. Introduction Hardened steel Pin is designed according to IEC60950 clause 2.10.8.4 ...
2024-12-09 18:47:52
|
SS Electrical Safety Test Equipment IEC60884-1 Figure 13 Socket Outlet Lateral Strain Test Apparatus
|
IEC60884-1 Figure 13 Socket-Outlet Lateral Strain Test Apparatus 1. Introduction This device is for checking the resistance to lateral strain for ...
2024-12-09 19:16:17
|