1 - 10 of 25
lighting chains pressure test device
Selling leads
|
... in push-in lampholder of lighting chains. Lampholder contacts in push-in lampholders shall be reliably secured in the lampholder body by mean ...
2024-12-09 20:33:12
|
|
... 20.12.4 figure 2 and GB7000.9 clause 11.3 figure 2. It’s applied for checking security of lampholder contacts in push-in lampholder of the ...
2024-12-09 20:33:12
|
|
...Pressure Test Apparatus 1. Introduction Oven is widely applied to the fields of motor, glass, ceramic, PC board, coating and etc. for the purpose ...
2024-12-09 18:37:16
|
|
IEC60950 Test Probe Kit Contains Jointed Finger Probe Rigid Test Finger Ball Pressure Test Apparatus ect. The PG-60950 contains the devices listed in ...
2024-12-09 18:44:06
|
|
... of the enclosure under test with oscillating tubes (R200-R1600), or the support of the enclosure may be moved up or down. The test is mainly apply ...
2025-07-21 00:11:11
|
|
... surface of the part to be tested is placed in the horizontal position and a steel ball of 5 mm diameter is pressed against the surface with a ...
2024-12-09 18:47:52
|
|
...-9 figure 7 and ISO20653 figure 8 and 9. IPX9K fan jet and jet distribution for test device to verify protection against high pressure/steam jet ...
2025-01-27 05:22:34
|
|
...Device for Testing Cable Insulation Sheaths 1. Introduction The indentation device is designed according to IEC60811-508:2012 figure 1, the device ...
2024-12-09 20:33:12
|
|
..., DIN40050-9 figure 7 and ISO20653 figure 8 and 9. IPX9K fan jet and jet distribution for test device to verify protection against high pressure...
2025-07-21 00:11:11
|
|
...Pressure and Temperature Jetproof Test Equipment 1. Introduction IPX9K High temperature and high pressure jet spray test chamber is designed ...
2025-07-21 00:11:11
|