China Electrical Safety Test Equipment manufacturer
Pego Electronics (Yi Chun) Company Limited
Pego Electronics-Focus on developing and promoting IEC lab testing equipments
8
Home > Products >

led testing instruments

31 - 40 of 81

led testing instruments

Selling leads
... of IEC60695-11-5 and IEC60695-2-2 standard. The test machine specifies a needle-flame test to simulate the effect of a small flame which may ... 2024-12-09 18:55:12
IEC60598-1 Clause 4.14.2 Bending Moment Test Device for Semi-Luminaires 1. Introduction The test device is designed to meet the test requirement of ... 2024-12-09 20:28:11
IEC60598-1 Clause 4.4.4 G5/G13 Lampholders Axial Force Test Device for Fluorescent Lamps 1. Introduction The axial force test device is designed to ... 2024-12-09 20:28:11
IEC60598-2-13 figure 13.6.2.1 Ground Recessed Luminaires Torque Load Test Apparatus 1. Introduction The ground recessed luminaires torque load test ... 2024-12-09 21:48:21
IEC60598-1 PLC Control Suspended Luminaire Torque Test Device with 5Nm Torque Range 1. Introduction The suspended luminaire torque test device is a ... 2025-08-09 00:15:09
... figure 1 for determining the resistance of enamelled articles to impact (Pistol test). The test apparatus consists of a striking bolt with a 5mm ... 2026-06-19 00:17:58
Greenhouse Use 0.1lx~1000klx Handheld Illuminometer PHOTO-200 1. Introduction The illuminometer is applied to test the illuminance at site, it adopts ... 2024-12-09 19:22:47
...Test Apparatus for Testing Enamelled Articles against Impact, Compliant with ISO4532 Introduction The pistol test apparatus is designed according ... 2026-06-19 00:17:58
.... This precision instrument automatically stops after completing preset test cycles, enabling accurate evaluation through wear pattern inspection ... 2026-03-14 00:29:14
Hand-Held Blue Light Hazard Tester Conforms to CIES 009/E:2002 1. Introduction The blue light hazard tester adopts CCD long focal length and wide ... 2026-01-04 13:27:30
Page 4 of 9 :   |< << 1 2 3 4 5 6 7 8 >> >|