11 - 19 of 19
lampholder fixity pressure test device
Selling leads
|
...-9 figure 7 and ISO20653 figure 8 and 9. IPX9K fan jet and jet distribution for test device to verify protection against high pressure/steam jet ...
2025-01-27 05:22:34
|
|
...Device for Testing Cable Insulation Sheaths 1. Introduction The indentation device is designed according to IEC60811-508:2012 figure 1, the device ...
2024-12-09 20:33:12
|
|
..., DIN40050-9 figure 7 and ISO20653 figure 8 and 9. IPX9K fan jet and jet distribution for test device to verify protection against high pressure...
2025-07-16 00:08:56
|
|
...Pressure and Temperature Jetproof Test Equipment 1. Introduction IPX9K High temperature and high pressure jet spray test chamber is designed ...
2025-07-16 00:08:56
|
|
...test chamber High Temperature High Pressure for Auto Parts 1. Introduction IPX9K testing is the most strictly IP rating, it is applied to test all ...
2025-07-16 00:08:56
|
|
...Device for Testing indentation Distance 1. Introduction The load device is consisted of a 5mm±0.05mm diameter pressure ball attached to a system of ...
2024-12-09 20:42:28
|
|
...Device for IP Rating Testing 1. Introduction The spray nozzle hand-held device is designed according to IEC60529 figure 5, it is it is apply to ...
2025-07-16 00:08:56
|
|
IEC60529 Figure 5 Hand-Held Device (Spray Nozzle) to Verify Protection Against IPX3 Spraying and IPX4 Splashing Water 1. Introduction The spray nozzle ...
2025-07-16 00:08:56
|
|
..., ceramic, PC board, coating and etc. for the purpose of drying, preheat and finalize the design. The oven is consisted by working room, air supply ...
2024-12-09 20:53:35
|