21 - 30 of 200
insulating material test finger
Selling leads
|
Test Finger Probe with 125mm Stop Meet the requirement of IEC60335-2-14 Introduction The test finger probe is designed according to IEC60335, GB4706.1...
2024-12-09 18:22:24
|
|
...Test Finger Probe Kits Test IEC61032 Test Probe B Test Probe 12 Test Probe 13 Test Probe 41 The IEC61032 test probe b, test probe 12, test probe 13 ...
2024-12-09 20:08:06
|
|
...Figure 12 of the IEC 61032 (Test probe 18) and is used to simulate a children human finger. It is also used by the standards of CSA, IRAM, UL. IEC ...
2024-12-09 18:28:53
|
|
...Test Finger Probe Hazardous Moving Parts Probe for Fan Blades Introduction Hazardous moving part probe is conforms to the standards of UL507 figure ...
2024-12-09 18:22:24
|
|
...Test Finger Probe 1 Diameter 50mm Steel Ball with CNAS Certificate Introduction: Designed according to IEC61032 figure 5, meet the requirement of ...
2025-07-24 00:11:45
|
|
...probe C for IP3X testing: Φ2.5 rod-length 100 Test Probe D for IP4X testing: Φ1.0 wire-length 100 Test Probe 1: 500g steel sphere Test probe 2: 15g ...
2024-12-09 18:22:24
|
|
...Test Finger Probe Test Probe C Test Rod for IP3X Testing 1. Introduction of Test Probe C: Designed according to IC61032 figure 3, meet the ...
2025-07-24 00:11:45
|
|
...etc. This wire is intended to verify the protection of persons against access to hazardous parts. It is used to verify the protection against ...
2024-12-09 18:22:24
|
|
... probe is intended to verify the protection of persons against access to hazardous parts. It is also used to verify the protection against access ...
2025-07-24 00:11:45
|
|
Children Small Finger Test Probe Kits / IEC61032 Test Probe 19 1. Introduction: Test probe 19 (child small finger probe) is designed according to ...
2025-07-24 00:11:45
|