121 - 130 of 226
indentation device safety test equipment
Selling leads
|
ISO6722-1 Motor-Driven Scrape Abrasion Test Apparatus for Testing Auto Cables 1. Introduction The scrape abrasion test apparatus is designed to meet ...
2024-12-09 23:41:36
|
|
IEC60335-2-75 figure 101 Splash Test Apparatus for Testing Cookware, oven and Stove 1. Introduction The splash test apparatus meets the requirements ...
2024-12-09 20:44:28
|
|
IEC61010-1 Clause 6.3.1 Figure A.2 Electric Safety Testing 2KΩ Non-Inductive Resistor 1. Introduction The 2KΩ Non-Inductive Resistor, names as ...
2025-04-26 07:40:05
|
|
...Test Rod with Hemispherical End 1. Introduction The 12mm hemispherical test rod is designed and manufactured according to the requirements of ...
2025-04-26 07:40:05
|
|
3-30A Ground Resistance Tester for Testing Medical Equipment as IEC60601-1 1. Introduction RK7305Y medical grounding resistance tester is used to ...
2024-12-09 22:06:54
|
|
..., EN50102, GB2423.55-2006, GB20138-2006 and etc. It is apply to sheet metal for mechanical impact testing. The device can be adjusted back and ...
2024-12-09 18:22:24
|
|
IEC60598-1 Luminaire Test Chain / Short Circuit Test Chain Made by 63%Cu/37%Zn and with 2.5Ω/m Resistance 1. Introduction Test chain is designed ...
2024-12-09 18:37:16
|
|
5KV AC/DC Withstand Voltage Tester for Testing Medical Equipment as IEC60601-1 1. Introduction The RK2672CY medical withstand voltage tester has all ...
2024-12-09 22:06:54
|
|
IEC60335-2-14 Single Station Kettle Insert Withdraw Endurance Testing Machine with 220V 50Hz Power Supply 1. Standard of Kettle Insert Withdraw ...
2024-12-09 18:56:38
|
|
IEC60695-11-5 Needle Flame Tester with ISO17025 authorized Third-lab Calibration Certificate 1. Introduction Needle flame tester is made as per ...
2024-12-09 18:28:01
|