41 - 50 of 133
impact testing machine
Selling leads
|
IEC62262 2J Single Spring Hammer with 500g Equivalent Mass for IK07 Impact Test 1. Introduction The spring hammer consists of three principal parts: ...
2026-05-24 00:10:03
|
|
... from rest through a vertical distance of 1.3m onto the sample. In addition, the steel ball is suspended by a cord and swung as pendulum in order ...
2026-01-04 13:27:37
|
|
IEC62368-1 Annex T.6 Pendulum and Vertical Drop Sphere Impact Test Equipment 1. Introduction The pendulum and vertical sphere impact test equipment is ...
2025-04-25 12:32:44
|
|
...Impact Test Universal Spring Hammer 1. Introduction The universal spring hammer is fully designed as per the requirements of IEC61010-1 clause 8.2...
2026-05-24 00:10:03
|
|
...operator holds the striking element to release the hammer at the drop height specified in Table 2, the corresponding impact energy is generated. ...
2024-12-09 18:58:39
|
|
... 8.5 & figure 2, ISO6722-1 clause 5.11 (cold impact) and ISO 19642-2 clause 5.5.8 & figure 11. The cold impact test is intended to verify that the ...
2026-01-05 00:24:05
|
|
Impact Test Equipment IEC 60320-1 60068-2-75 IK04 Spring Hammer for Testing Appliance Inlets 1. Introduction 0.5J spring hammer applies for performing ...
2026-05-24 00:10:03
|
|
...Impact Protection IK rating Tester from IK01 to IK10 1. Introduction Mechanical impact (IK) coding, or international mechanical protection, is the ...
2026-05-24 00:10:03
|
|
..., reinforced nylon, glass reinforced plastic, ceramic, cast stone and electrical insulating materials. It is an ideal test equipment for chemical ...
2024-12-09 18:39:18
|
|
... hammer is adjustable to perform IK01 (0.14J), IK02 (0.2J), IK03 (0.35J), IK04 (0.5J), IK05 (0.7J) and IK06 (1J)tests. IK ratings are defined as ...
2026-05-24 00:10:03
|