1 - 10 of 98
iec61010 1 finger probes
Selling leads
|
...-1 clause 22.11, EN50075 clause 8.1, IEC61010-1 clause 6.2.2 and Figure B.1, IEC60884-1 clause 10.1, AS/NZS3112 clause 3.14.12.4 and Appendix K3 ...
2025-04-27 00:06:27
|
|
IEC61010-1 Clause 6.2.2 Figure B.2 Jointed Finger Probe 1. Introduction The Test Probe B, named as Jointed finger Probe, is designed according to the ...
2025-07-25 00:09:36
|
|
IEC61010-1 Clause 8.2.1 12mm Hemispherical Test Rod with Hemispherical End 1. Introduction The 12mm hemispherical test rod is designed and manufacture...
2025-04-26 07:40:05
|
|
...simulate access to hazardous parts by children of more than 36 months and less than 14 years. Specification of Small Child Finger Probe: Diameter ...
2025-07-25 00:09:36
|
|
...Finger Probe and Short Test Pin Probe The test finger probe and short test pin probe are designed according to IEC61032 standard. The test finger ...
2024-12-09 19:16:17
|
|
... Finger Probe would be difficult. The Unjointed Finger Probe meets IEC 61032 requirements, Figure 7, Test Probe 11.The Finger Probe may be used to ...
2025-07-25 00:09:36
|
|
.... The standard test finger probe is intended to verify the basic protection against access to hazardous parts and also be used to verify the ...
2025-07-25 00:09:36
|
|
.... 2. Test Sample of IP3X Test Finger Probe: Easily accessible enclosure live parts or mechanical parts. 3. Introduction of IP3X Test Finger Probe: ...
2024-12-09 18:51:55
|
|
...Probe Kit Contains Jointed Finger Probe Rigid Test Finger Ball Pressure Test Apparatus ect. The PG-60950 contains the devices listed in the core of ...
2024-12-09 18:44:06
|
|
...Finger Probe Kits Test IEC61032 Test Probe B Test Probe 12 Test Probe 13 Test Probe 41 The IEC61032 test probe b, test probe 12, test probe 13 and ...
2024-12-09 20:08:06
|