71 - 80 of 135
iec60529 ip test chamber
Selling leads
|
IEC60529 Clause 14.2.3 and Clause 14.2.4 IPX3 and IPX4 Ingress Protection Testing Hand-Held Spray Nozzle 1. Introduction The IPX3 and IPX4 Ingress ...
2025-07-31 00:11:44
|
|
... to IEC61032 figure 5, meet the requirement of IEC60529-IP. The diameter of the sphere is 50mm+0.05. Test probe 1 is for IP1X testing, it means for ...
2024-12-09 18:35:02
|
|
Test Ball Test Sphere with Diameter 50mm and 12.5mm for IP1X and IP2X Testing Test Probe 1 (500g steel sphere) Introduction: Designed according to ...
2024-12-09 18:22:24
|
|
...-Held Device IP Testing Equipment Spray Nozzle for IPX3 and IPX4 Introduction: Water spray nozzle is strictly designed according to the requirement...
2025-07-31 00:11:44
|
|
...IEC60529, IEC60598-1 Section 9.2.9, and is suitable for waterproof testing of outdoor electrical and electronic products and lighting products ...
2025-04-25 12:32:47
|
|
... 8. Waterproof test simulates the condition of raining, which is mainly applied to electronic products, luminaire, electric components, motor and ...
2024-12-09 18:22:24
|
|
IEC60529 Stainless Steel Test Probe A with 50mm Test Sphere for IP1 Code Test Introduction: This probe is intended to verify protection of persons ...
2024-12-09 18:42:57
|
|
... under 0 to 50m below the water, the tank size can be customized as per the specimen. IPX8 is an open level, the test conditions are subject to ...
2024-12-09 19:36:23
|
|
...method La2 (constant air pressure), the object of this test is to determine the degree of protection against ingress of fine dust into electrotechn...
2024-12-09 21:07:27
|
|
...accessibility to live parts of socket-outlets and vehicle connectors. Meanwhile, it also be called as test probe B or jointed test finger in ...
2025-07-31 00:11:44
|