91 - 100 of 182
iec60335 test probe kits
Selling leads
|
...Test Probe with CNAS Calibration Certificate Standards This telecom test probe is designed according to the standard of IEC60950, IEC60065, ...
2025-08-04 00:07:15
|
|
... Standard Impact Test Vessel with Flat Aluminum Base as per IEC60335-2-6 clause 21.102 1. Introduction 1.8kg test vessel is designed to meet the ...
2024-12-09 20:43:57
|
|
Current-Carrying Hoses Torsion Test Apparatus IEC60335-2-2 1. Introduction The current-carrying hoses torsion test apparatus is designed to meet the ...
2025-06-29 00:36:29
|
|
... equipment during the tests from heating and abnormal operation. One is designed and made with the intention of determining the fulfillment of ...
2024-12-09 18:28:53
|
|
IEC60335 / IEC60065 500KΩ to 2GΩ Insulating Resistance Tester Electrical Safety Test Equipment 1. Introduction RK2682 Insulation resistance tester is ...
2024-12-09 18:39:18
|
|
... probe is intended to verify the protection of persons against access to hazardous parts. It is also used to verify the protection against access ...
2025-08-04 00:07:15
|
|
...Figure 12 of the IEC 61032 (Test probe 18) and is used to simulate a children human finger. It is also used by the standards of CSA, IRAM, UL. IEC ...
2024-12-09 18:28:53
|
|
... and GB16410-2007 figure 7. The vessels are made of unpolished commercial quality aluminum, have flat bottom and covered with a lid. 2. Features: 1...
2024-12-09 18:22:24
|
|
Test Probe 19 Child Small Finger Probe According to IEC61032 with 10N Force Applied Introduction: It is designed according to IEC61032 figure 13. This ...
2024-12-09 18:22:24
|
|
... Finger Probe would be difficult. The Unjointed Finger Probe meets IEC 61032 requirements, Figure 7, Test Probe 11.The Finger Probe may be used to ...
2025-08-04 00:07:15
|