111 - 120 of 152
horizontal flammability test apparatus
Selling leads
|
...Apparatus for testing the resistance to flexing of current-carrying hoses 1. Introduction This apparatus is designed according to IEC60335-2-2 ...
2024-12-09 20:30:55
|
|
..., IEC60598, EN50102, GB2423.55-2006, GB20138-2006 and etc. It is apply to sheet metal, household appliance, luminaire and etc. for mechanical ...
2024-12-09 18:54:37
|
|
... to IEC60884-1 clause 23.2 (table 18) and VDE0620 clause23.2(table18). It’s used to test the power cords and flexible cables of household appliance ...
2024-12-09 18:57:44
|
|
... Y.5.3/ figure Y.2, meets the requirement of UL498, UL1598, UL153, UL154B, UL103, UL8750, UL1741, UL514B, UL1278, UL1571 and etc. The water spray ...
2024-12-09 19:26:34
|
|
...the base of electrical products when raindrops fall on the ground. It is applied to test the water resistance performance of the bottom of ...
2024-12-09 22:51:31
|
|
Apparatus for Checking Damage to Conductors as Per IEC60884-1 Clause 12.2.5 and Figure 13 1. Introduction The apparatus for checking damage to ...
2024-12-09 22:23:20
|
|
... clause 2.13.12.2 and figure 2.2, BS1363-1 clause 19.5 and figure 18. It is widely used in power cord bending and swing testing on power cords, ...
2025-07-27 00:07:54
|
|
...Test Equipment According to IEC60335-2-23 1.Introduction Power cord flexing test apparatus is designed according to GB4706.15 and IEC60335-2-23 ...
2024-12-09 18:48:07
|
|
...IEC62262 (equivalent EN62262), and can meet the test requirements of IEC60598, EN50102. The IK Code was originally defined in European Standard BS ...
2025-07-27 00:07:54
|
|
...Carrying Strength Test Equipment for Medical Equipment 1. Introduction The handle strength test apparatus is designed to meet the test requirement ...
2024-12-09 20:33:12
|