81 - 90 of 204
glow wire test apparatus
Selling leads
|
... hammer is adjustable to perform IK01 (0.14J), IK02 (0.2J), IK03 (0.35J), IK04 (0.5J), IK05 (0.7J) and IK06 (1J)tests. IK ratings are defined as ...
2026-07-06 00:32:36
|
|
Spark Ignition Equipment for Testing the Electric Blanket Conform to IEC60335-2-17 1. Introduction The electric blanket spark ignition test apparatus ...
2026-01-05 00:24:05
|
|
...Test apparatus with Hardwood Block for Mechanical Strength Test on Resilient Covers Standard Number Description Figure number QTY BS1363-1 Test pin ...
2024-12-09 18:45:16
|
|
...Test Apparatus for Testing Pin-Insulating Seelves, Plug and Socket-Outlets 1. Introduction: Low temperature impact test apparatus is designed ...
2024-12-10 00:28:55
|
|
IK07 2J Spring Impact Hammer Test Apparatus with R25mm Hammer For Testing Luminaire 1. Introduction: The IK07 spring impact hammer is designed ...
2026-07-06 00:32:36
|
|
IEC60112 Stainless Steel Tracking Index Test Apparatus applied to CTI and PTI Test 1. Introduction The tracking index tester is used to determinate of ...
2024-12-09 18:28:01
|
|
IEC60695 45 Degree Tilted Needle Flame Test Apparatus Fire Hazard Protection Testing Equipment 1. Introduction The Needle Flame Tester consists of a ...
2024-12-09 19:02:52
|
SS Electrical Safety Test Equipment IEC60884-1 Figure 13 Socket Outlet Lateral Strain Test Apparatus
|
...Socket-Outlet Lateral Strain Test Apparatus 1. Introduction This device is for checking the resistance to lateral strain for socket-outlet ...
2024-12-09 19:16:17
|
|
...IEC60950-1 clause 4.2.5 and AS-NZS61439.4 clause 10.2.6.2. It is applied to do the drop impact test for external surface of enclosure. The device ...
2024-12-09 20:17:29
|
|
... for the mechanical strength test of blankets 1. Introduction The blankets mechanical strength test apparatus is designed according to IEC60335-2...
2024-12-09 20:30:55
|