111 - 120 of 149
cord retention testing apparatus
Selling leads
|
... testing machine can be provided with calibration certificate authorized by ISO17025. It is made according to the standards of IEC60335-1 clause 25...
2024-12-09 19:50:01
|
|
...the base of electrical products when raindrops fall on the ground. It is applied to test the water resistance performance of the bottom of ...
2024-12-09 22:51:31
|
|
Apparatus for Checking Damage to Conductors as Per IEC60884-1 Clause 12.2.5 and Figure 13 1. Introduction The apparatus for checking damage to ...
2024-12-09 22:23:20
|
|
...IEC62262 (equivalent EN62262), and can meet the test requirements of IEC60598, EN50102. The IK Code was originally defined in European Standard BS ...
2025-07-28 00:08:19
|
|
...Carrying Strength Test Equipment for Medical Equipment 1. Introduction The handle strength test apparatus is designed to meet the test requirement ...
2024-12-09 20:33:12
|
|
1. Introduction The IK mechanical impact test apparatus is designed according to IEC60068-2-75 Test Ehc and IEC62262 (equivalent EN62262), and can ...
2025-07-28 00:08:19
|
|
...Application: It is used for the impact resistance test of household and similar electronic and electrical products and their accessories such as ...
2024-12-09 20:43:24
|
|
...-1 clause 25.15, GB7000, GB2486 and etc., It is used to test tension and torque on the terminals of appliances provided with a supply cord and ...
2024-12-09 19:26:03
|
|
50W and 500W Horizontal and Vertical Flame Electrical Testing Machine According to IEC60695-11-4 / 3 1. Introduction Horizontal and vertical flame ...
2024-12-09 18:47:52
|
|
PLC Type Needle Flame Tester IEC60695-11-5 Flammability Test Equipment 1. Introduction The needle flame test apparatus is controlled by 7-inch color ...
2024-12-09 21:35:46
|