181 - 190 of 473
comprehensive environment test equipment
Selling leads
|
...Test Introduction: 1. The steel disc is designed according to IEC62368-1 figure 47, the disc is made of steel 1.1011/RFe 160, and configure with K ...
2024-12-09 23:41:36
|
|
UL94 Electrical Safety Test Machine Horizontal Vertical Flame Tester with Bunsen Burner 1. Introduction HVR-4 Horizontal and vertical flame test ...
2024-12-09 18:22:24
|
|
IK Pendulum Impact Test Device for IK01 to IK06 Conforms to IEC60884-1 1. Introduction IK01 to IK06 pendulum impact device is designed according to ...
2024-12-09 18:22:24
|
|
IEC60335-1 Clause 21.2 Scratch Test Pin Made of Hardened Steel 1. Introduction Hardened steel Pin is designed according to IEC60950 clause 2.10.8.4 ...
2024-12-09 18:47:52
|
SS Electrical Safety Test Equipment IEC60884-1 Figure 13 Socket Outlet Lateral Strain Test Apparatus
|
IEC60884-1 Figure 13 Socket-Outlet Lateral Strain Test Apparatus 1. Introduction This device is for checking the resistance to lateral strain for ...
2024-12-09 19:16:17
|
|
IEC60529 Figure 6 IPX5 and IPX6 Hose Nozzles for Verifying Protection Against Water Jets 1. Introduction The jet nozzles also be called as hose ...
2024-12-09 19:16:17
|
|
Drop Impact Test Hardwood Surface 1. Introduction The hardwood surfaces can meet the requirement of GB4943.1-2011 clause 4.2.6 and UL1993 clause 8.8.2...
2024-12-09 20:16:10
|
|
IEC60811 Figure 1 Indentation Device for Testing Cable Insulation Sheaths 1. Introduction The indentation device is designed according to IEC60811-508...
2024-12-09 20:33:12
|
|
IEC60068-2-75 IK01 to IK06 2J below Pendulum Impact Test Apparatus for Testing Socket and Plug 1. Standard complicant: IEC60068-2-75 annex D and ...
2024-12-09 20:43:24
|
|
..., luminaire, electric components and auto parts under the conditions of spraying water and splashing water, and then to check if they can meet the ...
2024-12-09 18:22:24
|