1 - 10 of 19
cap torque tester
Selling leads
Go and Not Go Gauge for Lampholder E40 7006-25 7006-26 According to IEC60061-3 Go Gauge for screw threads of lampholder (7006-25-7) Purpose: To check ...
2025-07-08 00:09:25
|
IEC60560-2 B15 and B22 Holder Torque Gauge for Torsion Resistance Testing 1. Introduction Meet the requirements of IEC60432-1 figure C.1 and IEC60560...
2025-07-08 00:09:25
|
... and torque tester is designed according to IEC62196-1 clause 25.3 figure 17 and IEC60309-1 clause 23.3, It is used to test tension and torque on ...
2024-12-09 23:54:34
|
...-1 clause 25.15, GB7000, GB2486 and etc., It is used to test tension and torque on the terminals of appliances provided with a supply cord and ...
2024-12-09 19:26:03
|
IEC61010-1 Clause 10.2.2 Electrical Testing Equipment Cord Anchorage Push-pull and Torque Tester 1. Introduction The electrical testing equipment, ...
2025-04-27 00:06:27
|
Torque Tester Apparatus for Direct Plug-In Equipment with Different Adaptors According to IEC60065 1. Introduction The torque tester apparatus is ...
2024-12-09 18:28:53
|
...HID and CFL. The design of PG338 digital torque meter refers to IEC and GB standards, and meet the test demands of labs and factories. Features: ● ...
2024-12-09 18:22:24
|
...test postive and negative toruqe of the lampcap, the test range is from 0 to 10N.m. The digital torque meter equips with E27/E26, B22d, E14/E12, G5...
2025-07-08 00:09:25
|
... applied to check the mechanical strength of the outer shell, the screw shell and the dome by screwing a test cap into the specimen. The test caps ...
2024-12-09 20:07:00
|
IEC60065 Plug - In Torque Test Apparatus Equip with BS / UL / AS / NZS Plugs 1. Introduction The plug-in torque test apparatus is designed according ...
2024-12-09 18:48:07
|