41 - 49 of 49
building material flame tester
Selling leads
|
...non-metallic materials such as plastic, reinforced nylon, glass reinforced plastic, ceramic, cast stone and electrical insulating materials. It is ...
2024-12-09 18:40:11
|
|
...Tester with 2.75J, 5.5J and 11J Hammers 1. Introduction The pointer-type plastic pendulum impact strength tester is mainly used for the determinati...
2024-12-09 18:41:50
|
|
IEC 60884-1 Figure 41 Apparatus for Pressure Test at High Temperature for Testing Pin-Insulating Sleeves 1. Introduction The high temperature pressure ...
2024-12-10 00:25:41
|
|
Test Pin with Diameter 1mm as Per BS1363-1 Figure 1 1. Introduction The test pin is designed according to BS1363-1 figure 1 & clause 12.6.1, BS1363-2 ...
2025-06-29 00:36:29
|
|
...DC500 and DC1000V ranges, the insulation resistance (0.MΩ～2000MΩ) has been devided into 4 ranges: 2MΩ, 20MΩ, 200MΩ and 2000MΩ. The insulation ...
2024-12-09 18:47:52
|
|
... of solid insulating materials on pieces taken from parts of equipment and on plaques of material using alternating voltages. It is applied to ...
2024-12-09 18:28:01
|
|
...Tester 2.75J 5.5J 11J and 22J Conforms to ISO180 1. Introduction The digital charpy impact test machine can meet the requirement of ISO179, the ...
2024-12-09 18:49:16
|
|
...Fire Hazard Safety Testing Equipment 1. Introduction The glow wire tester is designed according to IEC60695-2-10 t0 IEC60695-2-13, UL746A, IEC829, ...
2024-12-09 19:02:52
|
|
...an electrical safety test designed to evaluate the flame resistant properties of plastic materials used in electrical devices. The purpose of glow ...
2024-12-09 18:47:52
|