11 - 20 of 44
12 5mm ip test finger probe
Selling leads
|
IEC60335 Surface Temperature Probe with 4N Force for Satety Testing 1. Standard of Surface Temperature Probe: IEC60335 2.Application of Surface ...
2024-12-09 18:48:07
|
|
IP Testing Equipment Test Probe A for IP1X Testing According to IEC60529 Introduction of Test Probe A for IP1X Testing: The test probe A is designed ...
2025-08-02 00:07:59
|
|
IEC60529 Stainless Steel 2.5mm Test Rod for IP3 and suffix C code Test Introduction: The 2.5mm Test Rod is used to verify the protection of persons ...
2024-12-09 18:42:57
|
|
IEC60335-2-11 Surface Temperature Measuring Probe for Tumble Dryers 1. Introduction The probe for measuring surface temperature is designed according ...
2024-12-09 19:00:19
|
|
IP Testing Equipment Test Probe D for IP4X Testing Test Wire According to IEC60529 Introduction: Designed according to IEC61032 figure 4, meet the ...
2024-12-09 18:22:24
|
|
Steel Test Pin with Nylon Handle as Per BS1363-1 Figure 1 1. Introduction The test pin meets the requirements of BS1363-1 clause 12.6.1 and figure 1...
2024-12-09 21:43:55
|
|
... figure 6, meet the requirement of IEC60529-IP2. The diameter of sphere is 12.5+0.2, this sphere is intended to verify the degree of protection of ...
2024-12-09 18:22:24
|
|
...Test Finger Probe with Third-lab Calibration Certificate 1. Introduction The IP code test probes are designed accoring to IEC60529 and IEC61032 ...
2025-08-02 00:07:59
|
|
...inst access to hazardous live parts electrical toys. Picture: Probe List: Probes and application Probe code Short description Force to be applied ...
2024-12-09 18:22:24
|
|
... against access to hazardous parts. The jointed test finger is also used to verfiy the protection against access with a finger. It is design ...
2024-12-09 19:16:17
|