11 - 20 of 84
plug socket tester
Selling leads
|
Test Plug for Temperature Rise of BS Socket-Outlets as Per BS1363-2 figure 30 1. Introduction The test plug for temperature rise is designed according ...
2025-08-08 16:59:14
|
|
Apparatus for Mechanical Strength Test on Resilient Covers BS1363-1 Figure 2 for Plug and Socket Tester 1. Introduction Apparatus for mechanical ...
2025-08-08 16:59:14
|
|
Contact Depth Gauges 1. Introduction The contact depth gauges are designed according to AS/NZS3112 figure 3.1 (d) (e) (f) and clause 3.3.4 for depth ...
2025-06-21 07:30:57
|
|
Non-Contact Depth Gauges 1. Introduction The non-contact depth gauges are designed according to AS/NZS3112 figure 3.1 (a) (b) (c) and clause 3.3.4 for ...
2025-06-21 07:30:57
|
|
Three-Pin Gauge for Checking the Resistance to Lateral Strain 1. Introduction The three-pin gauge is designed according to AS/NZS 3112 figure 3.6 and ...
2025-06-21 07:30:57
|
|
Two-Pin Gauge for Checking the Resistance to Lateral Strain 1. Introduction The two-pin gauge is designed according to AS/NZS 3112 figure 3.7 and ...
2025-06-21 07:30:57
|
|
Contact Independence Test Pin for Withdrawal Force Test for Each Socket Contact AS/NZS3112 Figure 3.10 1. Introduction Contact independence test pin ...
2025-06-21 07:30:57
|
|
Test Plug with Brass Pins for Temperature Rising Test Introduction The test plugs with brass pins is designed according to AS/NZS 3112 figure 2.1 and ...
2025-06-21 07:30:57
|
|
Pin Clamping Units for Temperature Rise Test 1. Introduction The pin clamping units are designed according to AS/NZS 3112 figure 2.10 and clause 2.13...
2025-06-21 07:30:57
|
|
Pin Bending Test Apparatus 1.Introduction The pin bending test apparatus is designed according to AS/NZS3112 figure 2.8 and clause 2.13.7.2. All flat ...
2025-06-21 07:30:57
|