IEC 62196-1 PLC Electric Vehicle IP5X And IP6X Sand Dust Testing Equipment
|
IEC 62196-1 PLC Electric Vehicle IP5X and IP6X Sand Dust Testing Equipment1. Introduction: The sand dust testing equipment is applied to test the physical and other related properties of electronic and electrical products, electric vehicle, lamps, electrical cabinets, electrical components, automobiles, motorcycles and theire parts under simulated dust climate conditions. The machine is strictly designed according to the requirements of IEC60529 clause 13.4, 13.5 and figure 3 <Degrees of protection provided by enclosures (IP code)>, and it's required by the requirements of IEC62196-1 clause 20.2.
The sand dust testing machine adopts a box structure and no venue restrictions. It's controlled by PLC system + 7 inches touch screen. The machine is easy for operation, can set the cycle number, test time, dust time, dust stop time, heating time, vibration time etc directly on touch screen. The bottoms of the machines is equipped with 4 wheels so that can easily move the machine.
2. Features: 1). Applied for IP5X and IP6X dust-proof grade test. 2). The shell of the equipment adopts high quality steel, sprayed with stoving varnish. 3). The working chamber and sample rack are made of stainless steel 4). Transparent observation window made of toughened glass material, working chamber equipped with LED lighting 5). There is a dust-replaceable device at the bottom of the device, which can easily replace 100% of the used dust 6). 2KG talcum powder and a metal square-meshed sieve (nominal wire diameter 50μm and nominal width of a gap between wires 75μm) will be shipped together with the chamber, the talcum powder can be used for 20 time
3. Parameters:
4. Picture:
5. Packing List
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Product Tags: IP6X Sand Dust Testing Equipment IP5X Sand Dust Testing Equipment IEC 62196-1 Sand Dust Testing Equipment |
![]() |
Hole Diameter 0.5mm Aluminum Baffle IPX3/IPX4 Ingress Protection Testing Hand-Held Spray Nozzle IEC60529 Clause 14.2.3/14.2.4 |
![]() |
IEC60529 Clause 14.2.9 Figure 10 IPX9K High Pressure and Temperature Water Jetting Ingress Protection Testing Machine |
![]() |
IEC60529 Clause 14.2.3 and 14.2.4 Figure 4 Ingress Protection Testing Machine for IPX3 and IPX4 Waterproof Testing |
![]() |
IEC60529 Ingress Protection Testing Machine for IPX1 and IPX2 Vertical Drip Test |
![]() |
IPX5 and IPX6 Jet Nozzle Ingress Protection Testing Machine for IPX5 and IPX6 Testing Standards |
![]() |
IEC61851-1 Standard Test Finger For Verifying Accessibility To Live Parts Of Vehicle Connector |