SS IEC60529 Anti Dust Test Chamber For IP5X IP6X Tests
|
IEC60529 Anti-Dust Test Chamber for IP5X and IP6X Tests
1. Introduction: Dust chamber is for IP5X and IP6X testing as per IEC60529, the powder shall be able to pass through a square-meshed sieve the nominal wire diameter of which is 50μm and the nominal width of a gap between wires 75 μm.
IP5X test: the protection is satisfactory if the power has no accumulated in a quality which may interface the correct operation and cause harmful to equipment. IP6X test: the protection is satisfactory if no deposit of dust is observable inside the enclosure at the end of the test
2. Features: 1). Applied for IP5X and IP6X dust-proof grade test. 2). The shell of the equipment adopts high quality steel, sprayed with stoving varnish. 3). The working chamber and sample rack are made of stainless steel 4). Transparent observation window made of toughened glass material, working chamber equipped with LED lighting 5). There is a dust-replaceable device at the bottom of the device, which can easily replace 100% of the used dust 6). 2KG talcum powder and a metal square-meshed sieve (nominal wire diameter 50μm and nominal width of a gap between wires 75μm) will be shipped together with the chamber, the talcum powder can be used for 20 times
3. Parameters:
4. Figure
5. FAQ 1). What is the warranty period of the sand dustproof test chamber?
2). Can you provide third-lab calibration certificate?
3). Does the sand dustproof test chamber has English operation
interface?
4). Your power plug can not be used in our country, can you change
it for us? |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Product Tags: IEC60529 Anti Dust Test Chamber SS Anti Dust Test Chamber IP6X Stainless Steel Test Chamber |
![]() |
Hole Diameter 0.5mm Aluminum Baffle IPX3/IPX4 Ingress Protection Testing Hand-Held Spray Nozzle IEC60529 Clause 14.2.3/14.2.4 |
![]() |
IEC60529 Clause 14.2.9 Figure 10 IPX9K High Pressure and Temperature Water Jetting Ingress Protection Testing Machine |
![]() |
IEC60529 Clause 14.2.3 and 14.2.4 Figure 4 Ingress Protection Testing Machine for IPX3 and IPX4 Waterproof Testing |
![]() |
IEC60529 Ingress Protection Testing Machine for IPX1 and IPX2 Vertical Drip Test |
![]() |
IPX5 and IPX6 Jet Nozzle Ingress Protection Testing Machine for IPX5 and IPX6 Testing Standards |
![]() |
IEC61851-1 Standard Test Finger For Verifying Accessibility To Live Parts Of Vehicle Connector |